michel7752 0 Posted April 21, 2016 The ceramic bezel insert of my Oysterflex Yachtmaster jumped out for the second time. Originally, it had been glued with a somehow soft glue. Which glue should I use in order to fix the bezel, and where can I buy it (e.g. Amazon, ebay)? Share this post Link to post Share on other sites
WatchaholicMallorca 2 Posted April 21, 2016 I had an issue with the strap on my Nautilus, and I used Loctite glue that comes with a tiny brush similar to womens nail varnish, much better and no mess. Good luck Share this post Link to post Share on other sites
michel7752 0 Posted April 21, 2016 I had an issue with the strap on my Nautilus, and I used Loctite glue that comes with a tiny brush similar to womens nail varnish, much better and no mess. Good luck Thank you. Is Loctite hard-solid when dry, or also somehow soft-elastic like when the bezel insert was glued originally? Share this post Link to post Share on other sites
GenTLe 1,485 Posted April 21, 2016 I used this: http://www.officeworks.com.au/shop/officeworks/p/bostik-contact-bond-glue-50ml-bo298069 Share this post Link to post Share on other sites
Ant0702 449 Posted April 21, 2016 Use a very thin double sided adhesive film. You can buy it especially cut for bezels on ebay. Share this post Link to post Share on other sites
michel7752 0 Posted April 21, 2016 Use a very thin double sided adhesive film. You can buy it especially cut for bezels on ebay. Thank you very much. I can find several types of double sided adhesive tape/film on eBay, but not especially cut for bezels. Would you have a link? Share this post Link to post Share on other sites
BadPickle 2,658 Posted April 21, 2016 http://www.ebay.co.u...qYAAOSwnTJW~hb7 ask if they do different sizes for different bezels, maybe measure yours Share this post Link to post Share on other sites
michel7752 0 Posted April 21, 2016 Many thanks to you all. I am always surprised again how knowledgeable AND quick you are in this forum!!! Share this post Link to post Share on other sites
michel7752 0 Posted April 29, 2016 http://www.ebay.co.u...qYAAOSwnTJW~hb7 ask if they do different sizes for different bezels, maybe measure yours I ordered their standard size "3M adhesive rings for bezel inserts" (10 pieces) advertised for SKX007 Seiko watch variants. They fit the 40mm Rolex bezel inserts perfectly and are top quality. It took me 60 seconds to fix the insert again to the bezel - and I guess it will now stay there for an eternity. Thanks again for this tip. I highly recommend these adhesive rings. Share this post Link to post Share on other sites
BadPickle 2,658 Posted April 29, 2016 Good to know cheers Share this post Link to post Share on other sites
JSJ 0 Posted April 29, 2016 http://www.ebay.co.u...qYAAOSwnTJW~hb7 ask if they do different sizes for different bezels, maybe measure yours If I need an adhesive ring I'll know exactly where to go now. Inserts made easy and painless. Share this post Link to post Share on other sites