Nikosaldente 630 Posted May 16, 2017 Hey guys, If anyone has a ZF IWC with Working Power Reserve, a 51111 clone movement and has to remove the Counter Weight or Rotor for any reason mind the following: The real 51111 movement looks like this: The Clone 51111 looks like this: There is a decoration Jewel covering the center rotor screw that is consistent from 4 parts: 1) Metal Bolt 2) Synthetic Jewel 3) Bronze Bar 4) Tiny Screw Movement without decoration: First, the no1 part goes on the rotor screw with the narrow part facing upwards! Second goes the jewel goes on top of part 1... Then part 3 slides locking into place the parts 1+2. And finally goes the screw no4 that keeps everything into place! Check first photo! Make sure you don't drop anything on the floor or into the movement! Thanks for watching! Cheers! Share this post Link to post Share on other sites
GenTLe 1,485 Posted May 16, 2017 Well done mate :D You're progressing :) Share this post Link to post Share on other sites
Nikosaldente 630 Posted May 17, 2017 Well done mate :D You're progressing :) Thanks pal! I'm learning from a good teacher :D ;) Share this post Link to post Share on other sites