Jump to content
Sign in to follow this  
manodeoro

Easiest way to drill vintage case lugs for 2mm bars when you’re a city dweller

Recommended Posts

manodeoro

I’d like to share what I would call the «Easiest way to drill vintage case lugs for 2mm bars when you’re a city dweller»

 

So let’s begin with the facts ;

1 - I have a 6538 case with pre-drilled lugs

2 - I live in a city flat with no so much space for huge tools

3 - I dont have a drill press and I dont really have the place for that (see point 2)

4 - I have nice 2mm bars that fit in my 93150 bracelet and 580 end links but not in my 6538 case

 

And today I have decided to try an unlikely experience ... « drilling » the lugs of the 6538 with only hand grinds.

The best part of this thread is that … IT WORKED PERFECTLY.

 

The tools I have used are :

- 1mm diamond grind

- 2mm diamond grind

- 3mm rond grind

 

And here is a pic of those tolls ... much less bulky than a drill press

 

16974510LIMES.jpg

 

The process I used is VERY BASIC.

 

1mm diamond grind :

I first enlarged the pre-drilling until the grind passes easily through ... by working carefully it is possible to keep the holes in the same axis.

I think it’s best to rotate the file in both directions (rather than going back and forth)

 

2mm diamond grind :

There you have to be more patient and more applied because you do not want to pass completely through ... the aim being to get a hole of about 1.3 mm and not 2mm.

Always the same method (rotation rather than going back and forth) and it is necessary to stop regularly to control the result with a 2mm springbar ... from the outside.

When the springbar crosses almost completely the lug (it just blocks on the inside face) I changed tools.

 

3mm round grind :

I gently enlarged the hole from the inside side of the lug with the round file of 3mm ... always checking regularly to stop as soon as the springbar pass freely.

This is the most risky phase because you have to do it at an angle and you have to be very careful, otherwise you risk scratching the opposite lug.

 

All this process took ame bout 20 minutes to drill 2 lugs ... so it would take 40 minutes for a complete case.

It is probably longer than with a drill press (although ... if one takes into account the time to install the drill press, to fix the box and to align the holes, etc ...) but it is much less risky.

It's quite impossible to ruin your case and as one works gently the steel does not heat and does not harden.

 

Plus you can do this in « spare time » ... by watching a movie, on public transport (if you have a seat), in a car (if someone else drives), in an hotel room (for business travelers), etc ...

 

Here are some pictures of the job I did.

still have to drill the 2 remaining lugs and the chamfers of the external face but it is already … not that bad.

 

58300511LUGS01.jpg

 

50933712LUGS02.jpg

 

88396613LUGS03.jpg

 

11261714LUGS04.jpg

 

And here’s an overview with 2mm springbar in ... rather cool

Cant help but congratulate myself :clap:

 

85348215LUGS05.jpg

Share this post


Link to post
Share on other sites
Foxindebox

Very nice, well done :clap:

Share this post


Link to post
Share on other sites
manodeoro

Very nice, well done :clap:

 

Thanks

Share this post


Link to post
Share on other sites
NCRich

Just as good over here! Nice again manodeoro!

Share this post


Link to post
Share on other sites
olympusdaytona8

Nicee, you saved my bacon! Picked up a gen 7835 and was wondering how to ghetto rig a jig

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×