haarith50 0 Posted April 1, 2018 Hi, just bought an Audemars piguet replica and I’m struggling to take the links out, does any one have any tips on how to take them out? Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Thommo82 1,397 Posted April 1, 2018 Screws or pins? Show some pics Share this post Link to post Share on other sites
haarith50 0 Posted April 1, 2018 But unfortunately there are no arrows to suggest which way to pushSent from my iPhone using TapatalkAs u can see one side is rounded and the other is flat with a groove in itSent from my iPhone using Tapatalk Share this post Link to post Share on other sites
haarith50 0 Posted April 1, 2018 It’s ok, they’re screws, didn’t realise that’ earlierSent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Thommo82 1,397 Posted April 1, 2018 Wow Ok, yep, they are screws Screw Driver will sought that out. For future reference, if you do have pins on a bracelet and no arrows to show direction, the end with the split in it (which should be flush with the links) is the end that comes out. So, push out from the opposite end (which is often not flush with the links) Share this post Link to post Share on other sites
haarith50 0 Posted April 1, 2018 Hi mate, it’s late and I don’t have a small screwdriver , anything else I could use?Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Thommo82 1,397 Posted April 1, 2018 Using anything else will most likely end up with you scratching the bracelet, even if you’re really careful. I do not recommend using anything else, but if you’re desperate then a razor blade or end of a sharp knife may work. AGAIN, I do not recommend this. You may get the links out, but you will also scratch them. Order yourself a cheap watch tool kit from eBay. For around $15 you can get something with all the tools you need for basic fixes Share this post Link to post Share on other sites
haarith50 0 Posted April 1, 2018 Right ok thank uSent from my iPhone using Tapatalk Share this post Link to post Share on other sites
hamzah2 0 Posted April 4, 2018 the links are pretty easy to remove with the right screw driver. I managed to pick up a set of screw drivers from Ebay for about £3 Share this post Link to post Share on other sites
SilverG 0 Posted April 18, 2018 It's a 2-step system for all AP bracelets. You need to unscrew the screws first. Then you need to use a pin-pusher on the opposite side. When I got my first AP, I too was very confused. Share this post Link to post Share on other sites
slashdotcom 0 Posted April 26, 2018 Really...don't try to use a knife or something like that..you 'll scratch that beautiful bracelet Inviato dal mio SM-G930F utilizzando Tapatalk Share this post Link to post Share on other sites