Jump to content
Sign in to follow this  
onzenuub

A Review of the Movement of IWC Regulateur Reps

Recommended Posts

onzenuub

The IWC Regulateur is a watch of the Portuguese family, with a very classic aesthetic. Here a picture of the family:

 

4369520159_d4cd3ec495_o.jpg

 

There is a black model as well:

 

4369520163_2eec5f4490_o.jpg

 

In this post we review the modification made on the Asian 6497 movement to be a regulateur, and it is shown how to get a model that has not been replicated yet.

 

This is the model that has not been replicated yet:

 

4369520165_35dfb8c185_o.jpg

 

It is the platinum model, that it is terribly expensive (the gen). The idea is to obtain that model, using these two reps:

 

4369520173_03509d99ce_o.jpg

 

Installing the silver hands of the black model on the white model a platinum rep will be ready. The process is very simple, but offers us the chance of reviewing the modification on the movement.

 

Hands are removed:

 

4369520179_91dc655310_o.jpg

 

4369520183_7ffd50f5f5_o.jpg

 

The dial is removed and it is possible to see the three outputs of the movement, which is covered by a plate.

 

4370269686_cda119e48e_o.jpg

 

The oiler is pointing out the hour output.

 

If the plate is removed:

 

4370269716_558a1bdd3c_o.jpg

 

The removed plate has a gear in his down face, gear A, which takes the output form the minutes and forwards the movement to gear B, hour output, as red arrows show.

 

The gears A and B have no jewels and it is rotating over the plate…this is sadly quite familiar, Portuguese, Daytona,…

 

If gear B is removed, we see that there is nothing, nothing, fastening the gear B in the movement. Only the hole in the upper plate is fastening gear B.

 

4370269740_b2339b3d54_o.jpg

 

To make it clear, red point in following picture shows the location of gear B on the plate. There is nothing there!!

 

4370269768_2738f77603_o.jpg

 

I have been oiling some parts of the modification, trying to improve its reliability.

 

4369521389_4383cb3207_o.jpg

 

As a summary, although the modification is really bad, it is true that hour and minutes and rotating slower in comparison against seconds. Therefore, this modification is going to be less problematic that Portuguese or Daytona. However, I cannot see this movement having a long life.

 

Finally, the objective was to have a rep of the platinum model… it is here:

 

4369521439_e379ff6d43_o.jpg

 

Regards,

 

Francisco

Share this post


Link to post
Share on other sites
KBH

This looks like a perfect candidate for the Graphite Treatment. Very interesting.

Share this post


Link to post
Share on other sites
greg_r

I'd been wondering how well (or badly) the 6498 had been modified for that rep. Must confess that would put me off buying one. Interesting read. Thanks for the repost, Onze!

Share this post


Link to post
Share on other sites
ebzen02
:) What a classy watch!!

Share this post


Link to post
Share on other sites
Silverspeed

That is one pretty watch...shame that as soon as modification involves extra gears on a plate that it is done so poorly

Share this post


Link to post
Share on other sites
onzenuub

Like Francisco answered in the original thread:

 

Originally Posted by krpster

Great review as always. Very interesting about that hour gear...it's just sitting there! You will have to do a followup post 1 year from now so we can see how it's looking under there.

 

 

Francisco's answer:

after oiling some parts I guess it will last more than one year

__________________

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×