LightGeek 25 Posted October 23, 2013 DG4813 high beat movement, WI special. I regret selling my original one since it had the better spaced Omega logo and was cheaper (~$143). The new ones have the logo too close and start at $150. Either way, this one is for keeps... Unless they release one with a fixed up logo of course! Pumpkin. LightGeeks choice. Share this post Link to post Share on other sites
DG335 0 Posted October 23, 2013 My choice of travel my 45mm UPO, clear back. Love it and have had it the longest of any rep.. Might give the 42 cheapie a go based on that LG Share this post Link to post Share on other sites
GrimReaper 0 Posted October 28, 2013 I bought the same watch for $148 from Toro. I think it will be just fine for my first PO. And it also has the logo too close. Share this post Link to post Share on other sites
rhoffer 0 Posted October 28, 2013 Good looking watch. If you wear it do you look like Clooney or just some prick wearing an Omega? Just wondering. Share this post Link to post Share on other sites
core 0 Posted October 30, 2013 It seems the price has gone up again, now $158 http://www.rwg.bz/board/index.php?showtopic=28921 Is this 42mm Ultimate PO the same as the 42mm V5 PO seen here: http://www.trwatch.com/product_info.php?cPath=58&products_id=1102 (a TD on RWI) I would really like to get a 42mm Pumpkin PO, but not if all the current versions have the crown/stem problems and logo placement too-low. Share this post Link to post Share on other sites
TheInthusiest 0 Posted October 30, 2013 Mine says hello! My review will come soon. Share this post Link to post Share on other sites
GrimReaper 0 Posted November 12, 2013 Here is mine: DG4813 is really nice, unlike DG2813, it is smooth. And everything works more smoothly than my rough "Swiss" and Asian movements from BP factory. Only flaw I found is that the bezel is too much to the left, altough 1-15 markers are aligned quite well. Orange color is nothing special, it is more brown under normal conditions, it only turns orange if you angle the watch towards the light. This is my first watch with AR glass, and altough nice, it is not something that I really need. Bracelet is superb for a rep, practically gen quality. It is polished at the sides and nicely rounded at the edges. It is very hard to resize, I had to use two of my pin remover tools, at first Chinese one with small push pin and then the Swiss A&F with large push pin, to drive the bracelet pin completely out. Watch weighs 192g and 175g resized with minus 4 links. It is just too heavy for my puny 6.3" wrist. And I guess Aqua Terra 41.5mm is my Omega watch. It is also very high, exactly 15.0mm. 13.5mm is the most I can take. To recap, I think this is the rep that brings most bang for the buck, but you really need at least 7.0" wrist. Actually, more watches could use this movement, in my experience it is even better than Asian or Swiss ETA which cost $100-170 more. Share this post Link to post Share on other sites
LightGeek 25 Posted November 16, 2013 Works fine on my puny 6.4" wrist Share this post Link to post Share on other sites
Sam Circus 0 Posted March 19, 2014 Hi Guys, Is the lettering beside monogram is raised or printed on the dial? for Example "OMEGA" I am just wondering. Because I believe Gen has raised OMEGA written on dial. Share this post Link to post Share on other sites
rusty peters 0 Posted April 10, 2014 7" minimum...Bah! My 6.5 incher will prove you wrong...I hope. I have one of these on the way. Should I get a gen crown and tube on the way too? Share this post Link to post Share on other sites
zufir 0 Posted April 10, 2014 Ugh wrong thread...is this still available ? Share this post Link to post Share on other sites
turbomax97 0 Posted April 10, 2014 @Theinthusiast, is yours the same as the op? Share this post Link to post Share on other sites
LightGeek 25 Posted April 10, 2014 @Theinthusiast, is yours the same as the op? Looks like it given the "too shiny" bezel. I get lots of compliments with it on... namely... "Oh wow! An orange watch, looks great!" Share this post Link to post Share on other sites
zufir 0 Posted April 12, 2014 Does the bezel look like the orange from the CrPO pumpkin ? Share this post Link to post Share on other sites
TheOmegaFan 0 Posted April 12, 2014 Does the bezel look like the orange from the CrPO pumpkin ?I think on CrPO it's more matte. I actually don't own any of these, but this is more shiny. Not so shiny as LMPO actually Share this post Link to post Share on other sites
Lagger 160 Posted August 9, 2014 Is this a ceramic bezel? Share this post Link to post Share on other sites
MBR2014 9 Posted August 14, 2014 Is this a ceramic bezel? I don't THINK the orange is ceramic. (I have the orange one on order, myself). Maybe someone else can confirm. Share this post Link to post Share on other sites
UmpaHimself 222 Posted August 14, 2014 Pumpkin. LightGeeks choice. Share this post Link to post Share on other sites
Lagger 160 Posted August 15, 2014 I tried to buy one off Toro and wi but both said out of stock.......might be discontinued now Share this post Link to post Share on other sites
djward 0 Posted August 15, 2014 i tried also ,42 mm po out of stock , got darkside instead, i'll try him again next week Share this post Link to post Share on other sites
LightGeek 25 Posted August 16, 2014 I see. Will price accordingly Share this post Link to post Share on other sites
Bigcountrykris 0 Posted August 19, 2014 Is this a ceramic bezel? I don't THINK the orange is ceramic. (I have the orange one on order, myself). Maybe someone else can confirm. No, the orange is not ceramic. I see. Will price accordingly Im waiting in the wings Share this post Link to post Share on other sites
