plankton 1 Posted November 21, 2014 I have never seen that movement. Share this post Link to post Share on other sites
Left Coast Guy 24 Posted November 21, 2014 That angle ain't going to cut it bud. At a minimum we're going to need a close-up shot of the balance wheel. Looks like a 21J so far.... Share this post Link to post Share on other sites
J.Eric 693 Posted November 21, 2014 Definately some kind of 21j DG movement. Share this post Link to post Share on other sites
rusty peters 0 Posted November 21, 2014 DG2813. I just got one from eBay. Wait, it has a red wheel! It must be a genuine Rolex movement! Share this post Link to post Share on other sites
rawbaws 91 Posted November 21, 2014 DG2813 have one identical I am looking at now although mine is stainless steel colour not brass colour Share this post Link to post Share on other sites
Adamf 0 Posted November 21, 2014 Ok it stops randomly in various positions when wearing it anyone recon they could fix it or replace it or maybe recommend someone I'm in the uk the Midlands thanks Adam Share this post Link to post Share on other sites
BC1221 44 Posted November 21, 2014 easier to just replace it with a new movement. $30 bucks should get you a brand new one. Share this post Link to post Share on other sites
Adamf 0 Posted November 21, 2014 So is the movement the most expensive part of the watch as the strap/ case etc are excellent quality Share this post Link to post Share on other sites
justwannalook 1 Posted November 21, 2014 So is the movement the most expensive part of the watch as the strap/ case etc are excellent quality Think you meant LEAST expensive Share this post Link to post Share on other sites
Kleen™ 45 Posted November 21, 2014 2813 fake rollie mvmt.... Share this post Link to post Share on other sites
paulc 0 Posted November 21, 2014 I have a DG2813 that cost 20odd sovs, but this one looks nice, pity the makers couldnt decorate it and do a nickel plated version and buff the turd up a bit Share this post Link to post Share on other sites
D_Chico 0 Posted November 21, 2014 That's actually the NN 2813..made by Nannang..its the same as the DG 2813 made by Dixmont Guangzhou as far as parts, size, and beat go but the original DG 2813 is actually 22 jewels and a little bit more solid than the NN Both movements are the same set up so its a direct swap with whichever one you buy to replace that.. Just figured I'd drop some knowledge on you guys! Good luck with everything bud! Share this post Link to post Share on other sites
Adamf 0 Posted November 21, 2014 Ok so here in the uk what's my best option for a novice like me lol Share this post Link to post Share on other sites
D_Chico 0 Posted November 21, 2014 Ok so here in the uk what's my best option for a novice like me lol Is that one broken I take it? Just go to cousins website and search for DG2813M They should have it in stock Heres a link for you Good luck bud! https://www.cousinsuk.com/search?SearchTerm=DG2813M Share this post Link to post Share on other sites
RichardMiami 4 Posted November 21, 2014 Adam There are several watchsmiths on our TD list here -->> http://www.rwg.bz/board/index.php?showtopic=60 However, as you can imagine, they are VERY busy guys and may not be able to help you right away. In addition, there are several guys on the Forum who say that they fix watches. However, since they are not TDs, you are on your own with that. The Moderators (a group of VERY good looking and intelligent guys), will not back you up should things go wrong. Your third choice is to look around your home area, and start up a relationship with a local watchsmith. Do NOT go to an authorized Rolex dealer... they will not lock you up, but they will be insulted and probably just tell you no. A waste of time. Find an independent to work with. However, many independents will not work on Chinese movements, so you may need to try a few places. Be patient. No more "howevers" -- the next move is yours! Richard Share this post Link to post Share on other sites
Adamf 0 Posted November 21, 2014 Not sure if it's broken just randomly stops maybe an easy fix any ideas?? Share this post Link to post Share on other sites
paulc 0 Posted November 21, 2014 Adam, remove the rotor and hand wind it and see if it works, I bought a new 2813 from cousins and it stopped right off the blocks but is fine without the rotor attached....give it a go. Share this post Link to post Share on other sites
plankton 1 Posted November 21, 2014 That's actually the NN 2813..made by Nannang..its the same as the DG 2813 made by Dixmont Guangzhou as far as parts, size, and beat go but the original DG 2813 is actually 22 jewels and a little bit more solid than the NN Both movements are the same set up so its a direct swap with whichever one you buy to replace that.. Just figured I'd drop some knowledge on you guys! Good luck with everything bud! Damn look at that info!!!!! Share this post Link to post Share on other sites
Adamf 0 Posted November 21, 2014 Paulc I'm a newbie is that the big gold bit at the back lol and what's the hand ? Thanks Share this post Link to post Share on other sites
paulc 0 Posted November 21, 2014 Yes the big gold bit, not sure what you mean by hand. Share this post Link to post Share on other sites
Adamf 0 Posted November 21, 2014 You said remove the rotor and hand?? Share this post Link to post Share on other sites
