Jump to content
trailboss99

By-Tor's tribute to replica Rolex Explorer II's

Recommended Posts

trailboss99

KB4tuYx.jpg

I'm a huge Explorer II fan. So big that I absolutely had to get both versions, black and white. Actually I already owned a black ExpII quite a while back. You can read the review HERE.

 

However, that version had many problems, the biggest one being the cyclops/datewheel position. They were placed way too right on the crystal/dial. The SELs were less than stellar (didn't fit very well), and the hour markers were positioned too close to the minute ticks. I traded that one, and I had to wait for over a year to find the correct black version. Beware of the wrong version... many dealers carry it. Pay attention to the hour markers at '6 and '12 (too close to the minute ticks). Those are the easiest "tells" of the inferior CN version.

 

Actually the correct WHS version was available all the time from bklm1234 but it had an ugly, thick 24h hand which was a major turnoff for me. But miracles happen, sometimes the factories actually make improvements, even without screwing up anything! Now Eurotimez is able to get this best version (with thin 24h hand), and BK has access to this as well. It was time to make another purchase!

 

My new black one is visually identical base with my white franken-Explorer II. It has the correct datewheel/cyclops position and as I said, now even the WHS version uses a thin, excellent 24h hand. Other improvements are almost perfect date magnification (small) and perfect bezel numerals. They were either too thick - or too close to the bezel edge (on the older versions).

 

The only small complaint are the SEL endpieces, which are a bit too "rounded" in typical "Noobfactory" fashion. Also, the etched crown is the same as on the Noobmariner. Not disturbingly oversized, but still too visible. Other than that, the black version is extremely accurate "out of the box". Besides replacing the thick and ugly default crown (and tube) with genuine parts, there's absolutely no need to do any modifications. The black replica dial is excellent and I didn't even touch the crown guards. They're virtually identical with my gen 16710, which is technically the same watch as 16570.

51JlOlv.jpg

I've mentioned all the good points of this version in my previous ExpII writeups and the issue about those two different ETA GMT movements has been beaten to death, so I don't want to go there any more. All I can say, I've owned countless of ETA WHS versions and never had one single problem with them.

 

And as I've said many times, there are many stupid myths about genuine Rolexes floating around (even in this forum) that simply aren't true. Like "heavier bracelet" and "it's easy call out the rep from the steel color", etc. Another myth is that "all replica Rolexes have wrong crown position". Nice myth, but it has nothing to do with reality. The CHS Explorer II has 100% perfect crown position, and the crown position on the WHS version is 98% exact.

TeXWi8O.jpg

Does the genuine dial fit?

 

To make things more complicated, there are two different "batches" of even this best version. Visually, they're indistinguishable from eachother, but unfortunately none of these newer versions will accept genuine dials. For some reason the factory has changed the dial diameter at some point.

 

This is what Dluddy said (after experiencing with gen dial w/ Noobfactory Explorer II):

 

 

"The issue I had with my genuine dial and new "Noob" Explorer II' dials is as follows:

 

Gen dial is 27.5MM

Current Rep Dials are either 28MM or 29MM and the gen dial does not work.

 

I had to find an older 2006 Trusty model through resale as this one works fine since the dial is 27MM."

 

 

My franken is 3 years old, so apparently it's the older Trusty version. My personal advice (if you want to avoid stress): Forget the white one, and forget about the mods. Just exchange the fat crown and enjoy! What there's not to like on the black version?

vFYmafR.jpg

If it's so good, why this replica never became a big seller?

 

I simply don't know. It's one of the mysteries in life. One reason might be that the "Noob" ExpII was never "hyped" like some "megasellers", although it's better than GMTIIc (which has a bad rehaut engraving) and light years more accurate than the "Super" Sea Dweller, which looks fundamentally wrong. Another reason might be that people simply don't like the black version.

 

Personally, I love both versions (almost) equally. In my opinion, the black version has been the king of otb Rolex replicas for many years, but I predict the new WM9 v2 Submariner and possibly the WM9 Yacht-Master will inherit the crown (or at least offer a good challenge) very soon.

 

Sorry folks, I couldn't think of anything new to write about this replica model, which has always been one of my favorites, and definitely the most underrated Rolex replica ever... a real "sleeper". It's no surprise so many HC Rolex guys (like BK and dluddy) own this rep, and have used the base watch in their franken projects.

 

In short: I'm lovin' them both... and I finally have them both!

W2EdMSf.jpg

Click HERE for the wallpaper sized version.

 

 

--------------------

 

 

IMPORTANT NOTE: I will not reply to watch/part/mod questions via PM from the members anymore. I'd love to help everyone privately, but my PM box gets flooded/spammed these days with these enquiries and I simply don't have the time. This is a hobby for me, not a job. Please ask your questions in the public forum where you have thousands of potential helpers. It's nothing personal. Thanks for understanding.

By-Tor.

Share this post


Link to post
Share on other sites
By-Tor

Pictures back up.

Share this post


Link to post
Share on other sites
trailboss99

Thanks BT, really appreciate it!

#photobucketareevil

Share this post


Link to post
Share on other sites
andsan0

Any update on the best explorer II?

Share this post


Link to post
Share on other sites
Wrath_mcgrath

Me looking for an Explorer 2 , 16570 too... Looks like Toro Bravo is the best so far...got one before from him and the laser etching at 6 is invisible n took a light to see it... The Rolexes from other dealers look quite bad with the laser etching so visible n obvious which is a deadly giveaway. 

Share this post


Link to post
Share on other sites
hemmingsmax

I'm also looking for this replica watch. You got lucky finding it.

Share this post


Link to post
Share on other sites
dianawood

It's important to be careful when buying goats and to only buy from reputable dealers who sell high-quality replica watches.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×