Timebandit 0 Posted July 21, 2012 Part 6 OK, measuring and marking is our next Step Take the measurement from the underside where the bottomleather ends. Transfer the measure -3mm to the topside of both straps ( Lugside ) We need an adjustable groover, a very helpful tool to make grooves in the same distances from the edges. With this tool we can make the grooves at both straps Now we need another tool, an overstitch wheel. This one is necessary to mark the points for the sewing holes in exactly distances. All holes are marked Now we need an awl to make the holes for the sewing When all holes are made, we smooth the grooves with a wood creaser See this tutorial continued at: Part 7 : http://www.rwg.bz/board/index.php?showtopic=31611 See previous parts here Part 1 : http://www.rwg.bz/bo...showtopic=31603 Part 2 : http://www.rwg.bz/bo...showtopic=31604 Part 3 : http://www.rwg.bz/bo...showtopic=31605 Part 4 : http://www.rwg.bz/bo...showtopic=31607 Part 5 : http://www.rwg.bz/bo...showtopic=31609 Share this post Link to post Share on other sites