tatts1970 0 Posted January 5, 2017 Hello all. I'm brand new to the forum. I am in the process of building a custom bullhead chrono. I intend on using an SK 7750 case at 46mm. I had planned on using the Asian 7750 movement with a 7753 dial. I am having real issues finding a dial however. The dial need to be 31.50mm minimum and 35.50mm maximum. Will a ST1901 movement work in a 7750 case? I have run across quite a few dials to fit a Venus 175 or copy. Any help would be greatly appreciated! There just doesn't seem to be many dials for the 7753... Share this post Link to post Share on other sites
SamsonAusKognito 31 Posted January 5, 2017 There is thread ,,movements found in replicas" Under the topic watch, repair, upgrade and reference Share this post Link to post Share on other sites
SamsonAusKognito 31 Posted January 5, 2017 Maybe you can find something there, or some of the mod experienced under us can help you more. Share this post Link to post Share on other sites
fatarms 7,776 Posted January 5, 2017 You can always have a custom movement ring holder made, so that's not a problem. You should be able to fit a Seagull into a 7750 case. The thing you'll want to check is if the hands you plan on using will fit on a Seagull movement's pinions. Share this post Link to post Share on other sites
NCRich 13,746 Posted January 5, 2017 You can always have a custom movement ring holder made, so that's not a problem. You should be able to fit a Seagull into a 7750 case. The thing you'll want to check is if the hands you plan on using will fit on a Seagull movement's pinions. Movement thickness is much different if I remember correctly. There is a diagram with specs for both of them running around somewhere on the web. Share this post Link to post Share on other sites
NCRich 13,746 Posted January 5, 2017 Ah, this page on RWI has all the specs for each movement. I don't think it is the same as ours. https://www.replica-watch.info/threads/movements-guide-for-noobs.164783/ Share this post Link to post Share on other sites
tatts1970 0 Posted January 5, 2017 Great info!!! Thank you all!!! lots o research on the horizon! Share this post Link to post Share on other sites
tatts1970 0 Posted January 5, 2017 Perhaps using the 7750 movement is the best bet. Does anyone know of any suppliers for 7753 dials? Share this post Link to post Share on other sites