panerai love 2 Posted August 15, 2016 Hey everyone, can anyone help me on my problem with my noob 005? the problem with the watch is that sometimes the watch just stops after like a day even after a full wind. but the weird thing is that it starts to run again after i just pull out the crown and set the time. And sometimes it runs a full 56 hours after a full wind. What do you guys think is the problem? Share this post Link to post Share on other sites
GenTLe 1,501 Posted August 15, 2016 It can be a lot of things. Best option is to do a service and so make it to live forever. Share this post Link to post Share on other sites
porschespeedster 19 Posted August 16, 2016 ^^^^^^^^ listen to the words of the Prophet, he speaks only truth Share this post Link to post Share on other sites
panerai love 2 Posted August 16, 2016 It can be a lot of things. Best option is to do a service and so make it to live forever. Yeah, i think i'm gonna have it serviced. anyone you can recommend? Share this post Link to post Share on other sites
SamsonAusKognito 31 Posted August 16, 2016 It can be a lot of things. Best option is to do a service and so make it to live forever. Yeah, i think i'm gonna have it serviced. anyone you can recommend? Nick from Watchrepairs UK ... he is the man we trust in. Share this post Link to post Share on other sites
SamsonAusKognito 31 Posted August 16, 2016 http://www.rwg.bz/board/index.php?showtopic=102327 There he is. Share this post Link to post Share on other sites
panerai love 2 Posted August 16, 2016 This is really weird, at first i was thinking that the hour hand would hit the seconds hand cause everytime i noticed it stops, it always stops at 8, sometimes it also doesn't stop and would run for a full 56 hours. and when it does stop, i pull out the crown and set the time and it starts running again. Share this post Link to post Share on other sites
GenTLe 1,501 Posted August 16, 2016 This is really weird, at first i was thinking that the hour hand would hit the seconds hand cause everytime i noticed it stops, it always stops at 8, sometimes it also doesn't stop and would run for a full 56 hours. and when it does stop, i pull out the crown and set the time and it starts running again. It is more probable that there is some dust in the movement. Catching hands is notable with a loupe: these bastards get scratched EXTREMELY easily when catching between themselves. Share this post Link to post Share on other sites
panerai love 2 Posted August 16, 2016 This is how it always looks when it stops. i'm guessing the hands meet but as GenTle said, it could be dust cause sometimes it runs well, but when it does stop, it stops at 8. Share this post Link to post Share on other sites
BadPickle 2,747 Posted August 16, 2016 Take the back off and post a pic, not quite as blurry as these 2 would be a good help Share this post Link to post Share on other sites
GenTLe 1,501 Posted August 16, 2016 You can see if that's the problem (and correct it) only taking the movement out and looking from a side (while it is stuck). If that's the case is very easy to fix Just disengage the stuck hand, protect the dial with a bit of old photographic film and lift the hour hand a bit with a toothpick (then check it doesn't catch with the minute hand!). To take out the movement: clean the working area prepare something extremely clean and with zero dust on which place the movement remove the crown guard (2 screws) open the case back with a sticky ball or a ball of duct tape unscrew (a bit! Too much and you will fuck up the keyless) the tiny screw next to where the stem enter in the movement and pull the stem out unscrew the movement tabs put something CLEAN as movement support over the case back and rotate the sandwitch watch+movement support lift the case: the movement will remain on the support Do all in the opposite way to fit it back. Share this post Link to post Share on other sites
panerai love 2 Posted August 16, 2016 Take the back off and post a pic, not quite as blurry as these 2 would be a good help yup, will do so when i get back from vacation. Share this post Link to post Share on other sites
tonyh7 236 Posted August 16, 2016 Beware step 6 in reverse. Removing the movement tabs is easy. Securing them again in case can be a bit of a fecker in my opinion. Share this post Link to post Share on other sites
panerai love 2 Posted August 16, 2016 Thanks for the very detailed instructions and advice GenTLe! Share this post Link to post Share on other sites
porschespeedster 19 Posted August 17, 2016 (edited) I had to do this once---a lot of watches with raised metal dial markers have this problem, and cheap chinese rep factory QC isn't the greatest. Edited August 17, 2016 by porschespeedster Share this post Link to post Share on other sites
SamsonAusKognito 31 Posted August 17, 2016 Sending to service/repair is no option for you? Share this post Link to post Share on other sites
panerai love 2 Posted August 17, 2016 Sending to service/repair is no option for you? it is an option but i have to try what GenTle recomended cause it might save me money compared to having it sent across the country and spending money. Share this post Link to post Share on other sites
the_frenchman 31 Posted August 17, 2016 Sending to service/repair is no option for you? it is an option but i have to try what GenTle recomended cause it might save me money compared to having it sent across the country and spending money. Have you opened the heart of a watch before?? Do you have the right tools to make this job?? Trying to save some money instead of getting it serviced will be, in the worst case, much more expensive ( AKA buying a new watch , and throwing you fucked up watch ) Think about it , and make the right decision Share this post Link to post Share on other sites
Theduke.williams 1,037 Posted August 17, 2016 Had exactly the same problem with a Panerai homage. When I checked the second hand was sitting a little high, and as you guessed, was fouling the hour hand. Decided to have a go at fixing it myself, and promptly lost the minute and second hands in a thick shagpile carpet (try saying that when you're drunk). Now I have a cheap (21 or 23 Jewel?) watch sans hands sat at the bottom of a drawer somewhere - couldn't be bothered to try to find suitable hands, as I don't have a clue as to the fitments on this watch, and it 'd cost more to send it to a smithy than it's worth. Best bet (as in the words of the prophet above) - get the watch serviced by a profesional, and enjoy it for many years! Share this post Link to post Share on other sites
andyboy 5 Posted August 17, 2016 Looks like the hour hand is catching on the seconds hand. Share this post Link to post Share on other sites