lildaddym 0 Posted March 22, 2011 I have no idea, but I need to replace it or get a stem or two...any clues? Three hands with the date... Share this post Link to post Share on other sites
lildaddym 0 Posted April 4, 2011 Anyone? I know it's 26mm by 1.8mm... Share this post Link to post Share on other sites
KBH 7 Posted April 4, 2011 Asian 21j of some sort. Looks a lot like a DG2813 except with a nicer finish than most. Finding the exact match might be tough. Share this post Link to post Share on other sites
lildaddym 0 Posted April 4, 2011 I agree it's an Asian 21J...maybe I should match by the ligne size, and get something else...I hate to see a couple of good movements (all they need are stems) go to waste...maybe I can sell them... Wonder what the logo (engraving) that is visible through the wheel is? Share this post Link to post Share on other sites
Fiddo 0 Posted April 4, 2011 It looks like some type of 21J. In general, they are pretty inexpensive. Probably best just to replace it. Share this post Link to post Share on other sites
KBH 7 Posted April 4, 2011 Wonder what the logo (engraving) that is visible through the wheel is? I've seen that logo before. My guess is by tomorrow somebody will be along that will recognize it. Maybe Trailboss or Offshore. Edit: I have a couple of old busted movements here with that logo. 99% it's DG. They also have 2 stems if you want them. Share this post Link to post Share on other sites
lildaddym 0 Posted April 4, 2011 You have a couple of stems? Coolness! How can I get them from you? PM me, please. Wonder what the logo (engraving) that is visible through the wheel is? I've seen that logo before. My guess is by tomorrow somebody will be along that will recognize it. Maybe Trailboss or Offshore. Edit: I have a couple of old busted movements here with that logo. 99% it's DG. They also have 2 stems if you want them. Share this post Link to post Share on other sites
Ska 11 Posted April 4, 2011 I don't think it is a DG movement. If it is, its closer to the 2816 than the 2813 but the orientation of the incabloc on the dial side is off in relation to the 'Keyhole' shaped cutout. Likewise on the Back, the balance wheel plate is similar to a 2816 and 2813 but the bridge plate holding the winding gear is wrong. Share this post Link to post Share on other sites