Rocco_Sifredrik 0 Posted August 4, 2017 I was thinking of getting 2 cheaper models of Royal oak with quartz. I can get 2 instead of 1. Why are they cheaper is it because of the movement or what? Can i expect quality finish on the Product like a 300 dollar piece? Best regards Share this post Link to post Share on other sites
Left Coast Guy 24 Posted August 4, 2017 The quality of the quartz models generally depends on the model -- some use the same case as the auto, just different dial and mov't, others don't. Unless you research and do work to find out for that particular model, there is no way to know. Generally speaking, quartz reps have to have different subdials and work differently from then gen, so on top of the tick, tick, ticking, they are going to be poor copies in other ways. From seeing folks come and go on here, I'd always advise to spend more money and get the higher quality rep -- high quality reps retain value to re-sell, low quality generally don't. And most folks move upstream, not down. So save the time and start with something decent. Share this post Link to post Share on other sites
GenTLe 1,509 Posted August 4, 2017 Totally agree with LCG! Get few but get them good. The only time a quartz could be a valid alternative (in my view) is either: 1) when also the gen is a quartz (for instance -> https://s-media-cache-ak0.pinimg.com/originals/62/ff/c6/62ffc6b7c29c4a4556533cca37dfba8f.jpg but this is expensive too also as rep) 2) when there is no second hand and there is closed case back (for instance -> http://www.tb-688.com/index.php?route=product/product&path=92&product_id=2168 ) Consider that there are few good ones that are cheap and have real mechanical movements (for instance -> http://www.tb-688.com/index.php?route=product/product&path=106&product_id=953 ) Share this post Link to post Share on other sites
GenTLe 1,509 Posted August 4, 2017 I was thinking of getting 2 cheaper models of Royal oak with quartz. I can get 2 instead of 1. Why are they cheaper is it because of the movement or what? Can i expect quality finish on the Product like a 300 dollar piece? Best regards Grab this one (as soon as you do a couple of other posts): http://www.rwg.bz/board/index.php?showtopic=133014 Share this post Link to post Share on other sites
markeym3 2 Posted August 4, 2017 I was thinking of getting 2 cheaper models of Royal oak with quartz. I can get 2 instead of 1. Why are they cheaper is it because of the movement or what? Can i expect quality finish on the Product like a 300 dollar piece? Best regards Grab this one (as soon as you do a couple of other posts): http://www.rwg.bz/bo...howtopic=133014 agree +1 Share this post Link to post Share on other sites
leebob 0 Posted August 4, 2017 (edited) I have 3 AP roos divers, all quartz and wear um in rotation to work, I'm a plumber. I done mind if I damage um, they look smart. A nice cheep quartz makes a good daily. Imo Edited August 4, 2017 by leebob Share this post Link to post Share on other sites
Rocco_Sifredrik 0 Posted August 4, 2017 All of you thanks for the tips! Think im gonna go with a AP ROO around 300 and up.JF or Noob havent decided yet. This Will be my third rep. Got a calatrava and a nautilus. Share this post Link to post Share on other sites