Dan71 18 Posted March 1, 2018 (edited) Suk I check your pics and read other 3d about this new jkf 1665.http://www.rwg.bz/board/index.php?/topic/130433-something-is-wrong/ You have already the correct crown! (same dimension of athaya) also you have already the 2mm hole! But if you can add some detailed pics about crown for confirmation. And please misure the width of the crown , the width not the diameter .. So you have only to work the CG a little . Faded the insert with bleach, change the end link with rep 585 (correct for 1665 )or generic 580. For me is not necessary relume the plot dial but only color them in dirty orange/yellow . Edited March 1, 2018 by Dan71 Share this post Link to post
peppercorn 0 Posted March 2, 2018 On 2/28/2018 at 13:30, Dan71 said: Read this https://forum.replica-watch.info/forum/modification-repairs/280164-want-to-mod-that-cartel-jkf-factory-vintage-sub-the-basics-tutorial is not impossible to do (hole and CG )at least you throw in the garbage the middlecase and buy another 1665 mov 2812 for 160$.. more difficult is change tube and crown..but there are other tutorial for that .. Reading this thread with interest......the link you posted doesn’t work for me. Does it for others? Share this post Link to post
Dan71 18 Posted March 2, 2018 Reading this thread with interest......the link you posted doesn’t work for me. Does it for others? I don’t know why don’t work the link . Search these word ‘ Want to mod that Cartel JKF factory vintage sub - the basics Complete tutorial ’ on google and than open search for immage is a 1665 comex...Changed also the link above , and belowhttp://www.rwg.bz/board/index.php?/topic/123964-want-to-mod-that-cartel-jkf-factory-vintage-sub-the-basics-complete-tutorial/ Share this post Link to post
Suk 0 Posted March 2, 2018 Suk I check your pics and read other 3d about this new jkf 1665.http://www.rwg.bz/board/index.php?/topic/123964-want-to-mod-that-cartel-jkf-factory-vintage-sub-the-basics-complete-tutorial/You have already the correct crown! (same dimension of athaya) also you have already the 2mm hole! But if you can add some detailed pics about crown for confirmation. And please misure the width of the crown , the width not the diameter .. So you have only to work the CG a little . Faded the insert with bleach, change the end link with rep 585 (correct for 1665 )or generic 580. For me is not necessary relume the plot dial but only color them in dirty orange/yellow . I send you the pics tonight.. I’m at work nowGesendet von iPhone mit Tapatalk Share this post Link to post
Dan71 18 Posted March 2, 2018 Tks Suk! I think that many other are interested.. Share this post Link to post
Suk 0 Posted March 2, 2018 Here the pics... quite difficult to do macro with iPhone...My digital calliper has no battery, so I could not measure the crown well but it is about 7mm diameter and 3,5-4mm width... tomorrow I’ll put new batteries and check it againGesendet von iPhone mit Tapatalk Share this post Link to post
Dan71 18 Posted March 2, 2018 For me is identical at athaya crown or at least very similar.. but im curious to read other comment.. I found only this 3d http://www.rwg.bz/board/index.php?/topic/130433-something-is-wrong/ also the lug hole seem 2mm , and if it isn’t aesthetically are quite good. Below my athaya Share this post Link to post
Suk 0 Posted March 3, 2018 For me is identical at athaya crown or at least very similar.. but im curious to read other comment.. I found only this 3d http://www.rwg.bz/board/index.php?/topic/130433-something-is-wrong/ also the lug hole seem 2mm , and if it isn’t aesthetically are quite good. Below my athaya Yours hat a bevel in the inside part. Mine not. I think yours it is more defined.Here the mesures with the calliperDid you aged and modify yourself?Gesendet von iPhone mit Tapatalk Share this post Link to post
Dan71 18 Posted March 3, 2018 You are lucky the crown is like athaya ...In this pic the internal bevel is less evident depend if you screw tight the crown ..No work di by RA rolex addict France .. Share this post Link to post
Teenyweeny 0 Posted March 4, 2018 Nice 1665 May I know which factory and movement ?Sent from my iPhone using Tapatalk Share this post Link to post
Teenyweeny 0 Posted March 4, 2018 1665 specs is this?MOVEMENT: Asian 2836 25J Automatic 28800vphCASE DIAMETER: 40mmTHICKNESS: 14.6mmDIAL COLOR: Black Dial With Dot MarkerCASE MATERIAL: Stainless Steel 316LBRACELET: Stainless Steel 316LFRONT GLASS: Dome Plexi Plastic CrystalBEZEL: Steel OTHER: Water resistantOTHER: Solid case backHACK MOVEMENT: YesSent from my iPhone using Tapatalk Share this post Link to post
Dan71 18 Posted March 4, 2018 Nice 1665 May I know which factory and movement ?Sent from my iPhone using TapatalkJkf , 2836 Share this post Link to post
Suk 0 Posted March 4, 2018 You are lucky the crown is like athaya ...In this pic the internal bevel is less evident depend if you screw tight the crown ..No work di by RA rolex addict France ..What things did you mod? Gesendet von iPhone mit TapatalkNice 1665 May I know which factory and movement ?Sent from my iPhone using TapatalkJF / 2836Gesendet von iPhone mit Tapatalk Share this post Link to post
Dan71 18 Posted March 4, 2018 Many step..CG , lug hole, athaya crown, gen dial , crystal clark, bezel assembly clark , phong insert, endlink 580 woresaleoutlet .Total cost mod and parts: 2K € +other 600€ in accessories box , leather case, anchor, tag , label ecc ecc Share this post Link to post
Suk 0 Posted March 4, 2018 Many step..CG , lug hole, athaya crown, gen dial , crystal clark, bezel assembly clark , phong insert, endlink 580 woresaleoutlet .Total cost mod and parts: 2K € Wow!!! It looks gorgeous!!! But 2k is way out from my budget! I understand that you are satisfied with the modder, aren’t you? Maybe I’ll contact himGesendet von iPhone mit Tapatalk Share this post Link to post
Dan71 18 Posted March 4, 2018 I have sent to RA the watch 3 time : first time base mod(CG, hole, faded insert, dial lume )Second time (crown tube)Third time (enlarge dial seat and window for instal gen gen dial)Maybe if you send him only one time isLess expensive .. The change of the bezel assembly is do by myself.. I forgot eta 2846 and many other fix problem about movements Dwo grey by peterpark Share this post Link to post