Thommo82 1,397 Posted January 31, 2018 So I was in a fight but didnt know it. They are the best sort, no casualties. Share this post Link to post Share on other sites
GingerApple 7,302 Posted January 31, 2018 5 minutes ago, Thommo82 said: So I was in a fight but didnt know it. They are the best sort, no casualties. Can you tell that I was at work and fecking bored at the time? By the way, you'd have won it Thommo; I foresaw a Rocky style comeback with a last round knock-out when down on points. Grrrrrrrr. Share this post Link to post Share on other sites
Charly 0 Posted March 25, 2018 On 1/24/2018 at 07:02, Crowsnest3000 said: Another flaw there. The “S” on Gas and the “E” on Escape is too close together. on the BP ultimate 1:1 it is correct these ARF 904ls have too many flaws Yes its spaced on the older SD but the new ones are closer now, below is the image from Hodinkee ...unless Hodinkee has a fake one which i doubt lol Share this post Link to post Share on other sites
deju 1,883 Posted March 25, 2018 On 31/01/2018 at 10:40, GingerBubba said: Oooof!!!! Calling an Aussie vegan. That's below the belt. I'm docking you a point. Keep the punches up! Maybe he means @Thommo82 ate a vegan? Share this post Link to post Share on other sites
Thommo82 1,397 Posted March 25, 2018 50 minutes ago, deju said: Maybe he means @Thommo82 ate a vagina? Trust me, he’s had his fair share Share this post Link to post Share on other sites
Charly 0 Posted April 9, 2018 (edited) On 1/12/2018 at 12:27, GC said: No paint fella. It’s an optical illusion at certain angles that it looks like it has paint. But it don’t. Arrived 5 min ago! I have the same issue.. .. my QC pics clearly has caseback text filled with black paint but it melted when it travelled across the pond and it has a faint scratch on the clearcoat of the dial that is only visible when viewed from 12oClock impossible to see on the QC Edited April 9, 2018 by Charly Share this post Link to post Share on other sites
GingerApple 7,302 Posted April 9, 2018 4 hours ago, Charly said: my QC pics clearly has caseback text filled with black paint but it melted when it travelled across the pond Wow! That is bad luck! Perhaps Josh has started using the Icarus Postal Service again? Good luck. Share this post Link to post Share on other sites
Charly 0 Posted April 9, 2018 6 hours ago, GingerBubba said: Wow! That is bad luck! Perhaps Josh has started using the Icarus Postal Service again? Good luck. Not only that, the dial has a scratch on the clear coat that can only be seen on a certain angle and the rehaut coronet is way off to the left Share this post Link to post Share on other sites
Charly 0 Posted April 9, 2018 I Next to my NOOB v7 Molotowed Sub [thanx Ginger] You can see the scratch at 9 I bought this for its "supposedly" correct external appearance ,.casework, dial, bracelet bezel etc and not the movement [which the keyless works gets hung up and gets stuck] but I planned to change it to a gen ETA anyways . The caseback and dial issue is an easy fix . He only needs to send me a new dial and I can fix the caseback issue, but the rehaut...NOPE. The QC pics he sent me doesnt show the rehaut coronet alignment but I didnt bother because after all..it's ARF we're talking here , it's the best of the best right? ..boy I was wrong . Its clearly NOT the same watch as in the QC pics he sent me [QC pics clearly has painted caseback text]...and for him to deny it . that really pissed me off. Im better off building my own , like this Tudor 9401 [Pelagos is a gen] .. It's more satisfying Im force aging the SD43 with a hammer... Im really ticked off Share this post Link to post Share on other sites