NCRich 13,751 Posted August 17, 2018 So I acquired a scuffed up gilt 7928 Yuki dial that came with a watch and bunch of other parts from someone who couldn't actually build the watch. Actually I think they tossed every watch part they had into the box. Scratches are no big deal on a glossy watch, just matte spray and it disappears. So the gen is this: So I matte sprayed the dial, stripped the hands on a cartel, and relumed both the hands and the dial. I had a case but no bezel and insert so I ordered one from WSO. It looks better than the cartel ones, but I can see no way to make it functional. If I use a plexi loose enough for the bezel to turn you can knock off the whole assembly, and if I use a plexi large enough to be firmly held it won't turn. Same thing with a Clark 1675 bezel. Anyway it looks better and my OCD is such that I've been know to glue the bezel so that it is always in the correct position anyway. All in all a decent compromise I guess. It has a Tropic 39 plexi on it and I've drilled out the lugs and trimmed up the CGs a bit. Could maybe use a bit more of a trim, but I wanted to wear it. So pics: Share this post Link to post Share on other sites
Devil 2,905 Posted August 17, 2018 God I love Tudor's Share this post Link to post Share on other sites
EBB 25 Posted August 17, 2018 that actually looks really good Share this post Link to post Share on other sites
Automotiveromance 1 Posted August 17, 2018 Stunner! Awesome job on that dial Share this post Link to post Share on other sites
ruddz 0 Posted August 17, 2018 That watch is so stunning! Is there anyone that are makes watches like this after orders ? Share this post Link to post Share on other sites
GC 4,489 Posted August 17, 2018 Superb results Rich, amazing what you can do with spare parts. I’m probably wrong but I believe I see less Tudor watches in the wild than Rolex, in my opinion that makes them more rare Share this post Link to post Share on other sites
semperfi55 4,707 Posted August 17, 2018 Nice work! 1 hour ago, NCRich said: so I ordered one from WSO What's WSO? Do they sell watch cases? Share this post Link to post Share on other sites
hanski 40 Posted August 17, 2018 Nice build! I really like Tudor's these days. 40 minutes ago, semperfi55 said: Nice work! What's WSO? Do they sell watch cases? WSO is an eBay seller: http://www.ebaystores.com/wholesaleoutlet990 Carries pretty decent aftermarket parts. Share this post Link to post Share on other sites
semperfi55 4,707 Posted August 17, 2018 1 hour ago, mzinski said: WSO is an eBay seller: http://www.ebaystores.com/wholesaleoutlet990 Carries pretty decent aftermarket parts. Cheers mate! Share this post Link to post Share on other sites
Sigg 106 Posted August 17, 2018 Looks great mate, well done. Prefer it on the Oyster strap. Share this post Link to post Share on other sites
GingerApple 7,285 Posted August 17, 2018 Lovely! Did the bezel come like that with the pearl or have you made it yourself? Share this post Link to post Share on other sites
NCRich 13,751 Posted August 17, 2018 1 hour ago, GingerBlubba said: Lovely! Did the bezel come like that with the pearl or have you made it yourself? I made the pearl. Share this post Link to post Share on other sites
GingerApple 7,285 Posted August 17, 2018 20 minutes ago, NCRich said: I made the pearl. Fancy pants! How do you do it, just thicker lume mix? Share this post Link to post Share on other sites
NCRich 13,751 Posted August 17, 2018 54 minutes ago, GingerBlubba said: Fancy pants! How do you do it, just thicker lume mix? Take the pearl out. Put tape behind the hole, apply lume. Let dry and then put a drop of epoxy over it. Let dry. Voila. Share this post Link to post Share on other sites
J!m 289 Posted August 17, 2018 One trick I do is to take the T39 and lap it down 1mm. Then it looks a lot like a vintage T19 high dome. And the WO990 bezels are tricky. I've used them a lot, and learned to order three to make one good one, through mixing parts. But if it's spinning well, just a bit loose, Take out the washer and "taco" it a bit before putting it back in. That'll stiffen it up a bit. And overall it looks really good. I would take a bit more of the guards (sides) however. I think a lot of people don't understand how difficult it is to make them look right, as you need to reassemble the watch to have solid reference points with the crown, crystal and bezel ring. Share this post Link to post Share on other sites
Nikosaldente 630 Posted August 17, 2018 Rich, you've done it again! Looking great! Share this post Link to post Share on other sites
Jasonbaylee 192 Posted August 18, 2018 Awesome The print “Self Rotor” is such a delightful Smile whenever i look at the dial. By the way, what’s the thickness including its crystal? Thx"There are more than 1 road to Rome...." Share this post Link to post Share on other sites
Glaude 1,615 Posted August 18, 2018 That is an awesome build ! Great job Rich ! Share this post Link to post Share on other sites
frolex 0 Posted August 19, 2018 Wow, that looks so fantastic. Good work! Share this post Link to post Share on other sites