hanski 40 Posted January 19, 2019 And so it starts, my headlong dive into a trio of gen-stein-franken-Tudors. It started with a 17j Tudor ETA 2784. Picked it up off VRF for a reasonable price. Or so I thought until I discovered not only did it need a full service cleaning but replacement automatic works Bridge, keywords needed to be rebuilt, and a new balance required (still waiting on the balance). Regardless this inspired the first project, a blue 9411/0. - MQ Case w/ lugs reshaped, CG’s reshaped, tube retapped, chamfers recut, and repolished. - WSO Tension Spring (en route) - Clark’s 7030 Tube (en route) - Gen 704 Crown (I know 702 is correct but I came into this one for free) - TC Hand Set (aged in organic Pacific saltwater, reluming forthcoming) - Phong Insert (aging forthcoming) - Phong Dial (reluming forthcoming) - Erika’s Original MN Strap The pleasure of working on genuine movements and gen spec VN cases inspired me to continue the trajectory into these gen-stein-franken-Tudors. I’m partial to them for their cost - Rolex movements are out of control. Tudor movements are still reasonable, parts are readily available, and easy to work on. Ive decided to continue working my way back in time. The next two movements that arrived today are an ETA 2462 and an ETA 2461. Both picked up for a bargain on WUS and sold as “great running condition”. Hardly the case... The 2462 was missing a barrel bridge screw and someone installed the wrong screw in the minute c o ck. I was able to harverst those from the 2461 and it was off and running nicely. It even came with an interesting Tudor crown. The 2461 is now missing the two above mentioned screws plus the winding pinion, and stem. Hopefully a few parts and it’ll be up and running. And now begins the hunt for 7021 and 7016 case/dial/etc. I think I’m going to go for a 7928 dial on the 7016 and a black snowflake on the 7021. Guess what this is all leading me towards? Hunting for a Tudor 390 movement to eventually build a 7922 big crown. Oh the rabbit hole.... Share this post Link to post Share on other sites
Theviking 196 Posted January 19, 2019 It's the lord's work @mzinski I look forward to seeing your progress and hope to learn from it too. Share this post Link to post Share on other sites
BM284 1,505 Posted January 19, 2019 Mate - you have posted some quality threads in the past... and they keep on coming! I’m really looking forward to watching how this progresses. And, no doubt, will lust after the end product .... Share this post Link to post Share on other sites
hanski 40 Posted January 30, 2019 Well, first step has been preparing the case to better accept a gen 7030 Tube and 704 Crown. As the case come from MQ, it has an afterthought of a countersink for the tube. This causes any gen spec tube to sit proud of the case - which also causes the crown to float away from the case. I measured the two steps in the tube, 3.9mm and 4.9mm. Unfortunately I could not find those exact end mill, 4-blade, flat, carbide cutting bits so I ended up with a 4mm and 5mm. Thankfully it was close enough and the tube fit snugly into the end countersink. As you can see, I continued to bore in with the 4mm and stepped up to 5mm for the upper portion. It was a process of cut, measure, cut, measure, test the tube, repeat. I was using a precision milking machine but I think a drill press would work fine as well. Crown sit tight and flush. Next endeavor will be the lugs - reshaping a bit. Share this post Link to post Share on other sites
Theviking 196 Posted January 30, 2019 Very nice work @mzinski Share this post Link to post Share on other sites
hanski 40 Posted February 3, 2019 Finished reshaping the lugs this evening. Cut down the top a bit to make more gradual the slope from the rehaute down to the tip, then recut the chamfer, and repolished everything. I did intentionally ease the edges of the chamfer, I don’t want sharp, new cuts. It’s all slowly coming together. Now if only that new gluycdur balance wheel would show up from Germany... Share this post Link to post Share on other sites
BARTOLI1974 0 Posted February 3, 2019 Hi how did you do to lower and bevel the lugs? Best Regards Share this post Link to post Share on other sites
BM284 1,505 Posted February 3, 2019 Fantastic attention to detail... the more I see the more I know this will be an absolutely cracking build! Share this post Link to post Share on other sites
GC 4,379 Posted February 3, 2019 next level ninja status Share this post Link to post Share on other sites
Jackflash 1,130 Posted February 3, 2019 Nice! Are you going to tackle the Rehaut too? Share this post Link to post Share on other sites
hanski 40 Posted February 3, 2019 2 hours ago, Jackflash said: Nice! Are you going to tackle the Rehaut too? No, I’ve decided to let the rehaute alone. Share this post Link to post Share on other sites
Jackflash 1,130 Posted February 3, 2019 No, I’ve decided to let the rehaute alone. Yeah, there’s no good solution to the woky Rehaut on these MQ cases unfortunately. Finding a good crystal to optically compensate is pretty much the only way to go. Share this post Link to post Share on other sites
hanski 40 Posted February 4, 2019 Dial and hands relumed. So, I take back anything bad I have ever said about a lume application to a Tudor Dial - what a pain in the...every plot has four corners. But it’s done and I like it. Oh, and yeah, it’s a matte black dial now. Turned out Phong got a bad batch of gloss blue dials for gen movements. The date window misaligned to the date wheel. He promptly sent me a black one with a black insert. When the blue ones come in I’ll pick one up and swap it out. For now my 9411 will be a black dial project it seems. Share this post Link to post Share on other sites
BadPickle 2,657 Posted February 4, 2019 thats pretty cool lume job, less is more in my opinion, there too many where the lume is too puffy and too much, what did you use for the mix? Share this post Link to post Share on other sites
hanski 40 Posted February 6, 2019 My glucydur balance wheel arrived from germany! ...but the staff had a broken pinion. NOS my @$$ I decided to pick up a standard nickel balance wheel for now to get my watch going (it was supposed to be my Christmas gift to myself after all). That is installed and things are running smoothly. Since I’m with a matte black dial I need to decide on the insert. Three to choose from: Phong Black, Slay Kissing 40 Black, or Phong Blue. Nothing has been aged yet but when I do it’ll be a light touch. Lets crowd source some thoughts on this, what do you like best? Share this post Link to post Share on other sites
Jackflash 1,130 Posted February 6, 2019 Since I’m with a matte black dial I need to decide on the insert. Three to choose from: Phong Black, Slay Kissing 40 Black, or Phong Blue. Nothing has been aged yet but when I do it’ll be a light touch. Lets crowd source some thoughts on this, what do you like best? Wow! Very nice indeed! As lovely as Slays insert is, wouldn’t it be too early for this watch? If so the black Phong, lightly aged, would be my choice. Btw. That crystal has done wonders for the Rehaut, what’s the spec? Share this post Link to post Share on other sites
hanski 40 Posted February 6, 2019 4 minutes ago, Jackflash said: Wow! Very nice indeed! As lovely as Slays insert is, wouldn’t it be too early for this watch? If so the black Phong, lightly aged, would be my choice. Btw. That crystal has done wonders for the Rehaut, what’s the spec? It’s a Verlux 25-125. Share this post Link to post Share on other sites
Jackflash 1,130 Posted February 6, 2019 It’s a Verlux 25-125. mThanks! Very nice, sorry oversaw that on the spec list. Share this post Link to post Share on other sites
hanski 40 Posted February 6, 2019 11 minutes ago, Jackflash said: Thanks! Very nice, sorry oversaw that on the spec list. Thank you and thank you for the help/advice from your experience and build. Share this post Link to post Share on other sites
Jackflash 1,130 Posted February 6, 2019 Thank you and thank you for the help/advice from your experience and build. Very welcome! You‘ve done a fantastic job, and given me insights too. Enjoy every minute wearing it! Share this post Link to post Share on other sites
hanski 40 Posted May 12, 2019 And so the saga continues. I picked up a gen Tudor snowflake dial from ChronoShop a few months back. It was cheap and for good reason, practically none of the dial was left. After discussions with the various, professional dial refinishers, Kirk Rich in CA took on the project. Given the condition of the dial and my desire for a blue dial, I opted to have them refinish as gloss blue. Interestingly, Lou said a lot of owners send in their black dials to be refinished in blue. Hmmm... It took some time to get done, like 6-7 weeks. There was a bit of back and forth on the blue color - with a few tests and QC pics. Then it was from blue background to done and in my mailbox without another word. Lou was good to work with but I’m not 100% satisfied with the end result. I can see he used a screen print, not pad printing. The hour ticks touch the lume plots. And a couple of the lume plots are slightly misaligned. I’m probably going to end up keeping it without much fuss anyways. The time I’ve waited for it to be done combined with my excitement to continue on with my 7016 project overwhelms my urge to have him do it again. Anyways, since it’s been refinished, it could always be refinished again some time in the future. Which begs the question, when is something real? Sure, the providence of this dial and the process of refinishing it makes it “legit”. But in the end it’s just a piece of metal with a picture printed on it. Maybe thoughts for another thread... Another note, I asked them to refinish without providing lume. I wanted to do that myself. I’ve gone ahead and applied a light pumpkin orange lume to the plots. Next, on to adding some patina to the hands, relume them, and start assembly on the Tudor 2461 movement. Share this post Link to post Share on other sites
Jackflash 1,130 Posted May 12, 2019 Hate to say it, “Prince Oyster”, shouldn’t it be “Oyster Prince”? The date version being “Prince Oysterdate”. Share this post Link to post Share on other sites
hanski 40 Posted May 12, 2019 FFS - that’s not going to work at all! Looks like it’s going back to be redone again. Glad I posted, that slipped my attention. Share this post Link to post Share on other sites
Mr Seamaster 1 Posted May 12, 2019 FFS - that’s not going to work at all! Looks like it’s going back to be redone again. Glad I posted, that slipped my attention. Oh my.. that really hurts. I wouldn’t use the guy who restored it anymore. You’re not 100% ok with the result and putting the wrong text on it doesn’t seem to be professional at all.Hope u can get it straight again, cause other than that this is a lovely project! Just my 2cents Cheers Share this post Link to post Share on other sites
Jackflash 1,130 Posted May 15, 2019 Not sure a gloss blue dial is correct for the year either. Thought the gloss blue dials came later to resolve the dial-rot early ones were suffering from. Share this post Link to post Share on other sites