Glaude 1,615 Posted March 24, 2019 48 minutes ago, GenTLe said: it made them super stiff... That could certainly be useful for him, but not on a watch... *write down ... Bergeon 9010 Share this post Link to post Share on other sites
Automotiveromance 1 Posted March 24, 2019 13 hours ago, TomatoheadFred said: @GenTLe Would Bergeon 9010 work as a replacement lube? Or is that totally the wrong stuff? It's just that I have some handy whereas the other stuff I'll need to order.... You could, 9030 would be better. But it’s almost impossible to apply it properly through the tiny holes (as it only needs to go on the tips of the lobes inside the wheel).. You can’t submerge the reversing wheels in oil as it makes them, as @GenTLe said, super stiff. Lubeta is in essence 9010 oil diluted in a solvent. When you submerge the wheels and let the solvent evaporate, the oil remains in proper quantity. I use a mix of 3 parts 9010 to 100 parts naphta. Some say to use epilame first, but I never do on wheels that are otherwise in good condition. Share this post Link to post Share on other sites
GingerApple 7,300 Posted March 24, 2019 7 hours ago, GenTLe said: 15 hours ago, TomatoheadFred said: [mention=57251]GenTLe[/mention] Would Bergeon 9010 work as a replacement lube? Or is that totally the wrong stuff? It's just that I have some handy whereas the other stuff I'll need to order.... For the reversing wheels? I tried it, it made them super stiff... Then I'll learn from your mistakes! Thanks mate. Share this post Link to post Share on other sites
GingerApple 7,300 Posted March 24, 2019 1 hour ago, Automotiveromance said: You could, 9030 would be better. But it’s almost impossible to apply it properly through the tiny holes (as it only needs to go on the tips of the lobes inside the wheel).. You can’t submerge the reversing wheels in oil as it makes them, as @GenTLe said, super stiff. Lubeta is in essence 9010 oil diluted in a solvent. When you submerge the wheels and let the solvent evaporate, the oil remains in proper quantity. I use a mix of 3 parts 9010 to 100 parts naphta. Some say to use epilame first, but I never do on wheels that are otherwise in good condition. Ahhhh, I see. Thanks. Share this post Link to post Share on other sites
Enthusiast88 3 Posted March 24, 2019 (edited) Had the same issues a while back with a Tissot eta2836, took it to my watch smith and he did exactly what was mentioned in the first page of this post plus some good ol oil in there. Was back to normal within minutes. Hope you get it solved OP! Edited March 24, 2019 by Enthusiast88 Share this post Link to post Share on other sites
Mystery Shopper 5,887 Posted March 24, 2019 This sounds much more complicated than the recent GMT issue that was resolved. Share this post Link to post Share on other sites
BadApple 13,081 Posted March 24, 2019 Forgive my ignorance but I assume that Rolie is WatchRepairsUK in the TD list? Share this post Link to post Share on other sites
GingerApple 7,300 Posted March 24, 2019 52 minutes ago, BADAPPLE said: Forgive my ignorance but I assume that Rolie is WatchRepairsUK in the TD list? NO! ROLIE IS @ROLIE PM HIM. THE OTHER ONE IS NICK, ALSO GOOD!!!!! BLOODY NOOBS!!!!!! Share this post Link to post Share on other sites
BadApple 13,081 Posted March 24, 2019 I tried to PM @ROLIE and it said not receiving messages. Share this post Link to post Share on other sites
Glaude 1,615 Posted March 24, 2019 4 hours ago, TomatoheadFred said: Then I'll learn from your mistakes! Thanks mate. Just use bleach, worked for you in the past right ? 41 minutes ago, BADAPPLE said: I tried to PM @ROLIE and it said not receiving messages. Did you try shouting in the PM to see if it goes through ? Rolie might have his PM box full Share this post Link to post Share on other sites
GingerApple 7,300 Posted March 24, 2019 @ROLIE is from oop north. Whenever I contact him, he insists on carrier pigeon. Share this post Link to post Share on other sites
BadPickle 2,749 Posted March 24, 2019 1 hour ago, BADAPPLE said: I tried to PM @ROLIE and it said not receiving messages. Maybe he thinks you’re a complete cunt? Jus’ sayin’ Share this post Link to post Share on other sites
BadApple 13,081 Posted March 24, 2019 6 minutes ago, pickledbeetroot said: Maybe he thinks you’re a complete cunt? Jus’ sayin’ HOW VERY DARE YOU Share this post Link to post Share on other sites
ROLIE 46 Posted March 24, 2019 6 hours ago, BADAPPLE said: I tried to PM @ROLIE and it said not receiving messages. Sent you a pm reply 5 hours ago, TomatoheadFred said: @ROLIE is from oop north. Whenever I contact him, he insists on carrier pigeon. Nope its currrrrrrrrrrrry her pie on Share this post Link to post Share on other sites
GingerApple 7,300 Posted March 24, 2019 19 minutes ago, ROLIE said: Nope its currrrrrrrrrrrry her pie on And this is why I'm lobbying Google Translate to include a northern dialect as a translating option! Although your attempt above sounds more black country to me! Share this post Link to post Share on other sites