Phil994 14 Posted May 5, 2020 (edited) With Noob having a discount on the 116610LV Sub with A2836 movement is it worth considering this piece over the popular factories pushing the hulk like ZZF with the V2S or ARF Hulk.. This is a general discussion about the three that seem to be leading the way for the hulk post your thoughts Edited May 5, 2020 by Phil994 Spelling Share this post Link to post Share on other sites
Flinnt 2,009 Posted May 5, 2020 I have a Noob V9 hulk which I’ve replaced the bezel insert and dial with Clean Factory (which is what’s on the ZZF), as well as installed a gen ETA 2836 and a Prof crystal. I’m far from any sub expert so can’t comment on “gen like”, but in my opinion the Noob case is excellent. The 2836 was a must for me as I wanted gen ETA. Without doubt the Clean Factory dial is better than the Noob. The bezel insert is more personal taste. The Clean is more silver/platinum in the engravings compared to Noobs more white. The Noob has a darker green more towards olive green whereas the Clean has a lighter green more like emerald but still not the same colour as gen and not as saturated looking. I prefer the Clean but others may not. Keep in mind this is V9 Noob I’m comparing with. In the end I reckon you can’t go wrong with any of Noob, ZZF or ARF. But you can improve them all so maybe look at what you would improve on each and how easy/what it costs to do. Share this post Link to post Share on other sites
thejudge 29 Posted May 6, 2020 Well main improvement of the Noob 10 is supposed to be the bezel. So it would be interesting to see how it compares to ZZF. On the movements is there anyway to tell between a A2836 and SH/SA3315 without opening the watch? Share this post Link to post Share on other sites
OJHorology 352 Posted May 6, 2020 (edited) I just got a zzf v2s so 100% not biased. I would say: ZZF v2s ARF v3 Noob 10 (even with the discount) There's heaps of posts on this already by the way - its all really about opinion. As @Flinnt mentioned, can't go wrong with any of those 3 factories (unless you pick wrong and don't buy a zzf). Forgot to add, the same applies to LN. Edited May 6, 2020 by OJHorology Share this post Link to post Share on other sites
GingerApple 7,304 Posted May 6, 2020 32 minutes ago, thejudge said: On the movements is there anyway to tell between a A2836 and SH/SA3315 without opening the watch? Don't quote me on this because I know naafink, but do the hands on the clone movements rotate in the same direction as Gen (whereas they rotate in the opposite direction on the various ETAs)? Share this post Link to post Share on other sites
splke 4,429 Posted May 6, 2020 3 minutes ago, TheGingerFerret said: Don't quote me on this because I know naafink, but do the hands on the clone movements rotate in the same direction as Gen (whereas they rotate in the opposite direction on the various ETAs)? what like the watch goes anti clockwise 2 Share this post Link to post Share on other sites
Lagger 160 Posted May 6, 2020 Zzf easily the best, with an arf bracelet and hands perfect.........noob is behind at the moment Share this post Link to post Share on other sites
OJHorology 352 Posted May 6, 2020 27 minutes ago, TheGingerFerret said: Don't quote me on this because I know naafink, but do the hands on the clone movements rotate in the same direction as Gen (whereas they rotate in the opposite direction on the various ETAs)? I WILL quote you - because...you are correct. 16 minutes ago, Lagger said: Zzf easily the best, with an arf bracelet and hands perfect.........noob is behind at the moment After a clean/oil bath the zzf feels as good as the arf. 1 Share this post Link to post Share on other sites
Flinnt 2,009 Posted May 7, 2020 14 hours ago, OJHorology said: As @Flinnt mentioned, can't go wrong with any of those 3 factories (unless you pick wrong and don't buy a zzf). Gotta agree. The ZZF wasn’t around when I bought mine, and once it was I converted mine to look like the ZZF with dial and insert. If I was buying now I’d buy ZZF. Share this post Link to post Share on other sites
Intresting 21,712 Posted May 7, 2020 ZZF latest releases seem to have some minor (or major?) issues. Posted elsewhere. Share this post Link to post Share on other sites
Ferax 801 Posted May 7, 2020 I have the ARF v3 Submariner Hulk. I was really pleased when I first saw it. But then I noticed that it doesnt work!! The 6 hour indicator was too high and the minute hand was blocked and couldnt move further. However my watchsmith fixed it and now I am really happy with this watch. The bracelet feels just perfect. Don't know if I would buy it again. Looks really good, everything is perfectly aligned, but as I said I had some problem with it. I love submariner. I really need a black one. But don't know which one to choose. I think I will order one from BK next time... Share this post Link to post Share on other sites
OJHorology 352 Posted May 7, 2020 2 hours ago, Intresting said: ZZF latest releases seem to have some minor (or major?) issues. Posted elsewhere. They were supposed to fix the X issue with the serials but they didn't...gotta save some defects for some more releases Share this post Link to post Share on other sites
Phil994 14 Posted May 13, 2020 On 06/05/2020 at 16:52, OJHorology said: I just got a zzf v2s so 100% not biased. I would say: ZZF v2s ARF v3 Noob 10 (even with the discount) There's heaps of posts on this already by the way - its all really about opinion. As @Flinnt mentioned, can't go wrong with any of those 3 factories (unless you pick wrong and don't buy a zzf). Forgot to add, the same applies to LN. Haha, Thanks for all the replies I ended up going for the ARF V3.. I don't know if was the best choice however I will see it in person when it arrives. @OJHorology You think for a ZZF for the 114060 LN? Share this post Link to post Share on other sites
OJHorology 352 Posted May 13, 2020 3 hours ago, Phil994 said: Haha, Thanks for all the replies I ended up going for the ARF V3.. I don't know if was the best choice however I will see it in person when it arrives. @OJHorology You think for a ZZF for the 114060 LN? No worries - you can't go wrong with that ARF I'm sure you'll really enjoy your watch. Yeah, I would recommend the ZZF LN. I got the one below from M2M - ZZF v2 with a 2836 movement. The 2836 movement is slightly cheaper and very reliable. If you were to get one, you could compare them Share this post Link to post Share on other sites
MetalMickey 179 Posted May 13, 2020 Ooh. A “best sub” thread! Share this post Link to post Share on other sites
OJHorology 352 Posted May 15, 2020 On 13/05/2020 at 23:29, MetalMickey said: Ooh. A “best sub” thread! You can never have too many... And even though you don't want to...you still check the thread out hahah Share this post Link to post Share on other sites
Phil994 14 Posted May 15, 2020 (edited) Haha the competition is changing daily got to stay on the rise Edited May 15, 2020 by Phil994 Share this post Link to post Share on other sites
nunu78 1,743 Posted May 15, 2020 what about the newest Noob V10? is the insert color is same as ZZF. Share this post Link to post Share on other sites
MetalMickey 179 Posted May 16, 2020 18 hours ago, OJHorology said: You can never have too many... And even though you don't want to...you still check the thread out hahah Always. I have absolutely no idea about the current Rolex rep market Share this post Link to post Share on other sites
GenTLe 1,510 Posted May 16, 2020 This is just my small view: I just don't think that the 100/200$ difference are justified between even the Noob V8 on sale now (with A2836) and the Arf/Zzf. Share this post Link to post Share on other sites
Lagger 160 Posted May 16, 2020 9 minutes ago, GenTLe said: This is just my small view: I just don't think that the 100/200$ difference are justified between even the Noob V8 on sale now (with A2836) and the Arf/Zzf. I had a V8 no date, as well as owning V5,6,7 and 9s LN and LV............NOOBS are decent but well behind both ARF and ZZF 1 Share this post Link to post Share on other sites
GenTLe 1,510 Posted May 16, 2020 I had a V8 no date, as well as owning V5,6,7 and 9s LN and LV............NOOBS are decent but well behind both ARF and ZZFNot saying the opposite, it's just that personally those differences don't justify such price difference Share this post Link to post Share on other sites
Lagger 160 Posted May 16, 2020 8 minutes ago, GenTLe said: Not saying the opposite, it's just that personally those differences don't justify such price difference Yeah I know where you are coming from, personally I think reps are grossly overpriced, and circa $300 is where they should be at, I baulk at buying them at 400 plus. Just got a GFbreitling colt from Toro, for 308.....its first class, and exposes the prices of the others 2 Share this post Link to post Share on other sites
BackInHisBox 249 Posted May 20, 2020 On 04/05/2020 at 23:05, Phil994 said: With Noob having a discount on the 116610LV Sub with A2836 movement is it worth considering this piece over the popular factories pushing the hulk like ZZF with the V2S or ARF Hulk.. This is a general discussion about the three that seem to be leading the way for the hulk post your thoughts I’m currently in the same debate. I definitely lean toward the Noob V8 with A2836, because I really can’t see a difference between it and the ZZF or ARF. I see people claiming that the ZZF dial is cleaner, but that really doesn’t say anything to me. I mean in what way? How? I see zero difference in pictures. On 04/05/2020 at 23:25, Flinnt said: I have a Noob V9 hulk which I’ve replaced the bezel insert and dial with Clean Factory (which is what’s on the ZZF), as well as installed a gen ETA 2836 and a Prof crystal. I’m far from any sub expert so can’t comment on “gen like”, but in my opinion the Noob case is excellent. The 2836 was a must for me as I wanted gen ETA. Without doubt the Clean Factory dial is better than the Noob. The bezel insert is more personal taste. The Clean is more silver/platinum in the engravings compared to Noobs more white. The Noob has a darker green more towards olive green whereas the Clean has a lighter green more like emerald but still not the same colour as gen and not as saturated looking. I prefer the Clean but others may not. Keep in mind this is V9 Noob I’m comparing with. In the end I reckon you can’t go wrong with any of Noob, ZZF or ARF. But you can improve them all so maybe look at what you would improve on each and how easy/what it costs to do. Why did you replace the dial and bezel insert? Color off? Share this post Link to post Share on other sites
Flinnt 2,009 Posted May 20, 2020 5 hours ago, BeyondTheBox said: Why did you replace the dial and bezel insert? Color off? I didn’t like the colour of noob insert, too dark and olive. I do like the colour of the clean insert, even though it’s lighter and less saturated than gen. Just personal choice. I ordered the clean dial just to see and was going to sell it if I didn’t think it was significantly better. When it arrived I saw it was significantly better. Everything about it is crisper and cleaner, the indices look more refined, the sunburst effect looks better, it looks darker in certain light like gen. I can confidently say it’s a better dial. Is it worth spending the extra money for it?...probably not but it is better. 2 Share this post Link to post Share on other sites