J.Eric 693 Posted May 22, 2020 Hi guys, I was out running errands yesterday and notice the dial of my Deepsea was hanging a little low in the case. Thought no big deal, a movement ring screw came loose.... No big deal until looked a little closer... The screw heads snapped. So the question now is how to remove a broken screw??? Would it be better just to drill and tap new holes? Thanks for your help. Eric Share this post Link to post Share on other sites
GenTLe 1,485 Posted May 22, 2020 When it happened to me I used one of these: https://www.amazon.it/10-pezzi-Circuit-Carbide-gioielli-incisione/dp/B073P4PQLZ/ (one of it) mounted on a Dremel from the other side of the hole and basically it "screwed out" partially the broken screw enought to be taken with tweezers or a plier and unscrewed. I also used a supertiny screwdriver once: those screws aren't very strong so a tiny 0.8mm sharpened screwdriver can be slightly hammered and create a small slot in the remaining part of the screw, permitting to unscrew it. But I'd firstly remove the movement and dial from it! PS: why a Panerai rotor on that 21j??? 1 Share this post Link to post Share on other sites
J.Eric 693 Posted May 22, 2020 Thanks. I'll give it a try. I have removed broken screws and bolts before but nothing this small. And the rotor came with the watch. It's about 8 years old from Mary. Supposed to be the first edition with the 23j movement. Share this post Link to post Share on other sites
J.Eric 693 Posted May 26, 2020 After a long weekend of work, I have successfully removed the broken screws from movement ring. Thanks to GenTLe for the advice. Now to find some screws 1 Share this post Link to post Share on other sites
BravoDelta 22,288 Posted May 26, 2020 Dayum, that's a fat watch! Share this post Link to post Share on other sites
J.Eric 693 Posted May 26, 2020 Saying it is large is definitely an understatement. This is borderline workout materiel Share this post Link to post Share on other sites