RWI DOWN

[up_right 1]

17 hours ago, BravoDelta said:

Announcement?  

They have to overhaul the RWI servers to be able to handle the traffic that will be generated by the imminent release of the VSF PAM968, which many expect will bring the internet to its knees.

[Oascom 43]

1 hour ago, BravoDelta said:

My, that's expensive! 

If thats expensive you don't want to ask prices for other things hahaha. 

 

 

This hobby is expensive lol

1 hour ago, BravoDelta said:

My, that's expensive! 

If thats expensive you don't want to ask prices for other things hahaha. 

 

 

This hobby is expensive lol

[mclarendude 8,008]

5 hours ago, Popperini said:

I couldn't resist knocking up a little tribute to Glaude and the Glaudettes, for all the hard work they put in... THANKS YOU LEGENDS!

Give this man a beer. 

[furnitureincok 0]

-

[BadPickle 2,746]

51 minutes ago, furnitureincok said:

-

[xj4sonx 9]

@raddave

 you need to decrease the cushion and back off that hold pressure a little bit.  going to keep getting that flash if you don't

maybe a pc of tape at the corner of the mold to "assist" in the venting, that burn will go right away

 

 

[mmpu 7]

11 hours ago, Raddave said:

exactly , it will be one of those .....

 

actually i have no idea  how long till its running good 

Thanks for reply.. and thanks for everything for all the guys working in it ! 

M 

[fuzzmex 0]

Big thx to Raddave et al for what I'm sure are Herculean efforts to get things done up and running again. 

And to RWG for looking after us. 

[GingerApple 7,285]

8 minutes ago, fuzzmex said:

Big thx to Raddave et al for what I'm sure are Herculean efforts to get things done up and running again. 

Dude, Raddave tried turning it off and on again. When that didn't work, having exhausted his IT skills, he just fired up the VIP room BBQ and cracked open a beer. Cheers!

[hasel5 4,798]

20 minutes ago, TheGingerFerret said:

Dude, Raddave tried turning it off and on again. When that didn't work, having exhausted his IT skills, he just fired up the VIP room BBQ and cracked open a beer. Cheers!

That always works if not then i phone my Grandson up 

Hope all gets back to normal soon over there 

[Dr Fun Socks 76]

1 hour ago, xj4sonx said:

@raddave

 you need to decrease the cushion and back off that hold pressure a little bit.  going to keep getting that flash if you don't

maybe a pc of tape at the corner of the mold to "assist" in the venting, that burn will go right away

 

 

You know too many molding terms not to work in the plastic industry. Clearly he just needs to turn the temps down on the mold heater though. Or stop molding with polyprop, bucket material always creates flash. 

[Raddave 18]

13 minutes ago, Dr Fun Socks said:

You know too many molding terms not to work in the plastic industry. Clearly he just needs to turn the temps down on the mold heater though. Or stop molding with polyprop, bucket material always creates flash. 

you too huh ?

[Dr Fun Socks 76]

7 minutes ago, Raddave said:

you too huh ?

Yeah ive done my time. I was tool maker at a molding company in the uk for about 10 years. You work in plastics too? We’re all fucked when the oil dries up....

[xj4sonx 9]

1 hour ago, Dr Fun Socks said:

Yeah ive done my time. I was tool maker at a molding company in the uk for about 10 years. You work in plastics too? We’re all fucked when the oil dries up....

 

2 hours ago, Raddave said:

you too huh ?

probably didn't dry that ABS long enough and there is splay everywhere.

 

i was a process tech in injection molding for about 15 years I have moved to steel now

[iceberg1459 0]

so is this part of that big thing gonna happen?

[mclarendude 8,008]

so is this part of that big thing gonna happen?

No.


Sent from my iPhone using Tapatalk

[trailboss99 994]

Hey guys, the lads have been on it for the last 7 hours straight. The forum is up (for staff not you lot) but there are still some php issues to sort and memcache to set up correctly. Whoever took the work of art that was vB4 and turned it into the mess that is vB5 should be shot. 

If you go look you will see the goat is back so keep hitting that front page for us, it's actually useful as we load test a few things. 

It will be a little while yet but more like hours and not days. 

[Wingy 1]

On 27/05/2020 at 14:58, mclarendude said:

Anyone need an HVS or a thread approval?

 

 

Don't be so needy already...rookie Mods...Sheesh...

 

Edited May 29, 2020 by Wingy

[RDRoss 4]

1 hour ago, trailboss99 said:

Hey guys, the lads have been on it for the last 7 hours straight. The forum is up (for staff not you lot) but there are still some php issues to sort and memcache to set up correctly. Whoever took the work of art that was vB4 and turned it into the mess that is vB5 should be shot. 

If you go look you will see the goat is back so keep hitting that front page for us, it's actually useful as we load test a few things. 

It will be a little while yet but more like hours and not days. 

Thanks Boss. And generally I blame Microsoft for anything VB related. Just look at the last VIsual studio. 

[mclarendude 8,008]

@Wingy, c'mon. LMAO!

[mysterio 18]

33 minutes ago, RDRoss said:

Thanks Boss. And generally I blame Microsoft for anything VB related. Just look at the last VIsual studio. 

VB in this case stands for the vBulletin forum engine, not the Visual Basic programming language.

[Rawbe 0]

Godspeed.

must .. view .. m2m sales ..

[BOD 0]

Just when I get back from a work trip, this is what I get.  Oh well!

Thanks to Glaude and the G'dettes for taking care of the house for us!

 

[RDRoss 4]

1 hour ago, mysterio said:

VB in this case stands for the vBulletin forum engine, not the Visual Basic programming language.

Sorry. My bad. So used to dealing with code all I think about when I see vb is coding. Now a days. 

Edited May 29, 2020 by RDRoss

[tomeng01 10]

Big thanks to everyone at both RWI and RWG.
 

A good reminder to support both by becoming a supporter/patron/vip.