processengr 13,365 Posted December 2, 2020 Hi all, My new Gate toy with DG2813 w/o date complication ... has stopped working already...hour hand binds at 11 and backwards at 2.... sounds like date complication is somehow the problem....any suggestions where to start? If I force it in manual, the hour hand slips on the pinion.... Share this post Link to post Share on other sites
Simonix 8,660 Posted December 2, 2020 Without taking the movement out, and checking to make sure the dial/hands aren't touching, etc, not much else to do. 2813 movements only cost about $15 on Ali, and as you know Gate reps are cheap anyway... Share this post Link to post Share on other sites
NCRich 13,747 Posted December 2, 2020 12 minutes ago, Simonix said: Without taking the movement out, and checking to make sure the dial/hands aren't touching, etc, not much else to do. 2813 movements only cost about $15 on Ali, and as you know Gate reps are cheap anyway... $15 2813 movements should be left on Ali. They wind like sand. $25ish generally from Allwatchparts in the US. Much superior. Not worth fixing unless you just want to. I usually want to More than likely an obstruction with the sec hand. Pull it out and bend the sec hand down. I change my vote. Remove all the date set shit. Its pretty fragile. Here is the piece that fails, usually by changing the date from 10-2. 2 Share this post Link to post Share on other sites
processengr 13,365 Posted December 20, 2020 On 02/12/2020 at 11:29, NCRich said: $15 2813 movements should be left on Ali. They wind like sand. $25ish generally from Allwatchparts in the US. Much superior. Not worth fixing unless you just want to. I usually want to More than likely an obstruction with the sec hand. Pull it out and bend the sec hand down. I change my vote. Remove all the date set shit. Its pretty fragile. Here is the piece that fails, usually by changing the date from 10-2. @NCRich Can these be removed without disassembling entire movement? I have movement out and datewheel off. Share this post Link to post Share on other sites
NCRich 13,747 Posted December 20, 2020 10 hours ago, processengr said: @NCRich Can these be removed without disassembling entire movement? I have movement out and datewheel off. Sure, take the three screws off the cover. Lift it and the DW off and you will see this. This gives you the info. 1 Share this post Link to post Share on other sites