classikfan 0 Posted June 17, 2011 Hi All I'm new here so please be gentle. I have a rep Daytona which I need to dismantle. How do I get the the crown stem and the 2 push button stems out? I cant see any obvious places to release them, help gratefully accepted, thanks in advance. Stu Share this post Link to post Share on other sites
pfcdre 0 Posted June 17, 2011 hi the crown stem comes out with either a tiny push button on the movement very close to where the stem goes in, or some movements have a tiny screw, in the case of the tiny push button dont push too hard or you may damage the movement, lightly press and at the same time gently pull on the crown stem, for the tiny screw just a couple of turns will do it dont completely unscrew and stem should come out, as for pusher stems i dont think you need do any thing to get the movement out hope that helps cheers Share this post Link to post Share on other sites
classikfan 0 Posted June 18, 2011 hi the crown stem comes out with either a tiny push button on the movement very close to where the stem goes in, or some movements have a tiny screw, in the case of the tiny push button dont push too hard or you may damage the movement, lightly press and at the same time gently pull on the crown stem, for the tiny screw just a couple of turns will do it dont completely unscrew and stem should come out, as for pusher stems i dont think you need do any thing to get the movement out hope that helps cheers Thanks for that, simple when you know how. Watch fixed and back together again. Share this post Link to post Share on other sites
ThinkBachs 1 Posted June 18, 2011 Actually a question I had recently, nice to know I don't have to mess with the pushers (makes sense). Share this post Link to post Share on other sites