Jump to content
Theonewatches

Gen, VSF, Clean, GM and AR, 126334 41mm blue datejust detailed comparison

Recommended Posts

Theonewatches

Hello everyone, this is unfamous  Steve.
Today we bring you a full comparison of the GEN Blue datejust 126334 with several major manufacturers! Let's get right to it!

8f2f20be.jpg

3eac10ef.jpg

front view
There is unavoidable about the color difference in the blue dial, the GEN is a dark blue, the AR factory deviates the most and looks similar to a faded color!
AR sunburst on the dial is too strong, VS is the closest to GEN, followed by CLEAN, GM is too indistinct!

67b6321f.jpg

0c04863d.jpg

dcc3dc61.jpg

Bezel view
VS, CLEAN and AR are all very good in the teeth shape, GM is on the long side and the angle of the triangle on the inner edge is obviously too small! Also the triangle of the AR is too smooth.

a7ef2c7b.jpg

c8c55686.jpg

Stick view
The overall shape of the VS is closer to the GEN, VS is better filled, the downside is the lack of rounding of the sharp edges, the other three are still mainly due to the lack of filling of the inner edges, resulting in significant gaps. Clean's chamfering of the scales is still excellent.

21f0ba73.jpg

Crown side view
It’s not very good to compare because the angle of the picture will deviate. But after I repeatedly observed the physical comparison, the four factories are actually similar, all still good, or maybe my eyes are not very good! I'll have to see what you guys have to say!

7a855c2e.jpg

f3527bf4.jpg

Lume filling view
All three are very good, except for the GM, which is too smooth, and the AR is the grainiest, for the C, which is the closest in color and texture to the GEN!

8958c0bd.jpg

e9604c59.jpg

2f2e6f8f.jpg

3dbc96a8.jpg

e3f55089.jpg

b48960fb.jpg

Engraving font view
The VS and Clean are very flat, the GM and AR font have uneven edges, especially the AR!
As we can see, GEN's type is very glossy, something that all the factories lack! We noticed through the macro lens that GEN's ink printing is much fuller, but if you look at it from the naked eye, other factories do a good job, except AR, which can be noticeably different

12277bf2.jpg

d8100e7b.jpg

d6195f63.jpg

Hand view
The shape of the central axis of the hands, VS factory and C factory have done skeletonized solid structure, but C factory's central sleeve position, flatness is very poor, GM and AR's sleeve position is completely closed, and is very different from GEN.
From the side view, the whole arrangement of VS and GM is very close to GEN, AR appears too dense.

fb9a1eeb.jpg

Crystal Giant Side View
The overall translucency of all the factories is fine, and the cross-sectional chamfers of the windows are best polished by the AR factory!

ab2d477f.jpg

f70657bb.jpg

72936e27.jpg

c57eb044.jpg

a37bc522.jpg

7d3b45c9.jpg

b0a83206.jpg

51bffa9e.jpg

5aa53811.jpg

0a5237f3.jpg

6305123b.jpg

1c0e7aa5.jpg

a6b003c5.jpg

cc7ffe03.jpg

f79fa69a.jpg

a54b534a.jpg

bd2f2f8d.jpg

ebe2a209.jpg

d6c269ca.jpg

cc023db8.jpg

43f938c0.jpg

140d548b.jpg

5c51490b.jpg

344989c5.jpg

a74f5e97.jpg

dca2db3a.jpg

4fecd34e.jpg

1-31 calendar display view
There's nothing much to say about this! You can compare for yourself if you want to.

11e6489a.jpg

48b9a3f6.jpg

Rehaut view
The GM factory engraving has some darkening and looks a bit like rust; for the AR factory, the engraving looks a bit too light in person, both VS and Clean are still quite good

6ba5fd96.jpg

316e4487.jpg

Case side view
All the factories are fine in terms of case type, and there are no significant differences!

a0b5cf34.jpg

2c2426ce.jpg

Sel view
First, we can check the location of arrow pointed, the layered VS on the side of the bezel is the closest to the GEN, which is commendable, followed by the AR, which is less pronounced in the C factory, and the GM, which is almost flat.
Then where the lugs meet the headstock, VS and GEN are the same, GM is not too bad, VS and AR are almost flat.

127ba0fe.jpg

a9344e2b.jpg

c0487e5f.jpg

d444a2ec.jpg

48aed1e7.jpg

ae9d0a2a.jpg

Strap view
The VS and CLEAN both use AR steel straps, but the GM steel strap does feel a little different than the AR!
The engraving is still a far cry from the GEN.

df56c370.jpg

2bd95c84.jpg

Case back view
The same old problem as in the C factory, a ring around the bottom of the teeth, spillover from the brushed lines, unevenness!

f26a54f8.jpg

Lume view
The stripes on the bezel are very strong for VS, weaker for C, and almost non-existent for GM and AR.

d064227f.jpg

Laser view
GEN's irregularly arranged crown pattern is always a problem for factories! And we don’t need to be too concerned!

272e48d0.png

330117c6.png

ff4c370d.png

12153f9a.png

5409ea96.png

Comparative chart of various data
Note: All measurements are taken in a calibrated state and may be inaccurate due to slight deviations in caliper position
All the replicas haven't take off the plastic protector. the VS and GM have removed the steel strap protector as you can see, the GM is closest in weight to the GEN !

Well, that's it for today's post, thanks for watching, if there are any mistakes, please correct me, welcome to comment and exchange!

We will bring you more detailed comparisons between the replicas and GEN later, also to let you better choose your favorite style replicas, you can leave a comment on what style you are more interested in!

Description: (Some of the photos have deviated from the real thing because of the light source, the details are still based on the text, the size of the comparison pictures are relatively large, you can download them and enlarge them for comparison.)

 

There is no perfect replica, only the one you love the most.

Any questions, please contact with us:

Email: [email protected]

whatsapp: +86 17081934955

Telegram Channel: @theonewatches_steve

Website: www.theonewatches.ru

Edited by Theonewatches
  • Like 10

Share this post


Link to post
Share on other sites
Corn guy

Great!
Looks like every factory has is weakness. 
But from your experience, who do you think is the best for datejust?

Share this post


Link to post
Share on other sites
Abe Froman

Awesome! Thank you for the hard work doing this comparison.

Share this post


Link to post
Share on other sites
gran

I am so very impressed by your review. I am shocked. It is far and beyond anything I've seen before. I will probably never be able to do such a detailed and metric comparison.

tumblr_mn619jvsCt1rxaho8o1_400.gif?width

Thank you.

 

 

Share this post


Link to post
Share on other sites
Eeewan

Outstanding write up, will definitely help noobs like myself get to grips with all the different facets of reps.

Share this post


Link to post
Share on other sites
Roler

Brilliant post, for someone that has been looking at this watch this help immensely !

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×