Jump to content
Theonewatches

Gen, VSF, Clean, GM and AR, 126334 41mm blue datejust detailed comparison

Recommended Posts

Theonewatches

Hello everyone, this is unfamous  Steve.
Today we bring you a full comparison of the GEN Blue datejust 126334 with several major manufacturers! Let's get right to it!

53029860.jpg

9a47c22a.jpg

front view
There is unavoidable about the color difference in the blue dial, the GEN is a dark blue, the AR factory deviates the most and looks similar to a faded color!
AR sunburst on the dial is too strong, VS is the closest to GEN, followed by CLEAN, GM is too indistinct!

9fd55402.jpg

2079b02f.jpg

3a94e4eb.jpg

Bezel view
VS, CLEAN and AR are all very good in the teeth shape, GM is on the long side and the angle of the triangle on the inner edge is obviously too small! Also the triangle of the AR is too smooth.

c1801282.jpg

4181cb68.jpg

Stick view
The overall shape of the VS is closer to the GEN, VS is better filled, the downside is the lack of rounding of the sharp edges, the other three are still mainly due to the lack of filling of the inner edges, resulting in significant gaps. Clean's chamfering of the scales is still excellent.

7647859f.jpg

Crown side view
It’s not very good to compare because the angle of the picture will deviate. But after I repeatedly observed the physical comparison, the four factories are actually similar, all still good, or maybe my eyes are not very good! I'll have to see what you guys have to say!

137f58d5.jpg

6ef280d2.jpg

Lume filling view
All three are very good, except for the GM, which is too smooth, and the AR is the grainiest, for the C, which is the closest in color and texture to the GEN!

2bfca69b.jpg

cd459614.jpg

3c627ff6.jpg

4cb199b3.jpg

ba144c61.jpg

2973a1a7.jpg

Engraving font view
The VS and Clean are very flat, the GM and AR font have uneven edges, especially the AR!
As we can see, GEN's type is very glossy, something that all the factories lack! We noticed through the macro lens that GEN's ink printing is much fuller, but if you look at it from the naked eye, other factories do a good job, except AR, which can be noticeably different

f1d8a995.jpg

53daed13.jpg

11a0110b.jpg

Hand view
The shape of the central axis of the hands, VS factory and C factory have done skeletonized solid structure, but C factory's central sleeve position, flatness is very poor, GM and AR's sleeve position is completely closed, and is very different from GEN.
From the side view, the whole arrangement of VS and GM is very close to GEN, AR appears too dense.

c165b548.jpg

Crystal Giant Side View
The overall translucency of all the factories is fine, and the cross-sectional chamfers of the windows are best polished by the AR factory!

38f4a45b.jpg

0ca8a166.jpg

68383131.jpg

11c23605.jpg

37bf55d1.jpg

2d7e35f0.jpg

20c7f80a.jpg

1-31 calendar display view
There's nothing much to say about this! You can compare for yourself if you want to.

9094da7f.jpg

32b9ba0d.jpg

Rehaut view
The GM factory engraving has some darkening and looks a bit like rust; for the AR factory, the engraving looks a bit too light in person, both VS and Clean are still quite good

59038429.jpg

c94d0d09.jpg

Case side view
All the factories are fine in terms of case type, and there are no significant differences!

03c095ff.jpg

5e2664e6.jpg

Sel view
First, we can check the location of arrow pointed, the layered VS on the side of the bezel is the closest to the GEN, which is commendable, followed by the AR, which is less pronounced in the C factory, and the GM, which is almost flat.
Then where the lugs meet the headstock, VS and GEN are the same, GM is not too bad, VS and AR are almost flat.

04138e93.jpg

b1da452f.jpg

57f48044.jpg

68e0decb.jpg

962d6bf8.jpg

2500407c.jpg

Strap view
The VS and CLEAN both use AR steel straps, but the GM steel strap does feel a little different than the AR!
The engraving is still a far cry from the GEN.

07f30282.jpg

d09ee87e.jpg

Case back view
The same old problem as in the C factory, a ring around the bottom of the teeth, spillover from the brushed lines, unevenness!

2059a100.jpg

Lume view
The stripes on the bezel are very strong for VS, weaker for C, and almost non-existent for GM and AR.

54e930f8.jpg

Laser view
GEN's irregularly arranged crown pattern is always a problem for factories! And we don’t need to be too concerned!

60279b15.png

6928f640.png

a5d053e6.png

20ccfa19.png

46d9c80e.png

Comparative chart of various data
Note: All measurements are taken in a calibrated state and may be inaccurate due to slight deviations in caliper position
All the replicas haven't take off the plastic protector. the VS and GM have removed the steel strap protector as you can see, the GM is closest in weight to the GEN !

Well, that's it for today's post, thanks for watching, if there are any mistakes, please correct me, welcome to comment and exchange!

We will bring you more detailed comparisons between the replicas and GEN later, also to let you better choose your favorite style replicas, you can leave a comment on what style you are more interested in!

Description: (Some of the photos have deviated from the real thing because of the light source, the details are still based on the text, the size of the comparison pictures are relatively large, you can download them and enlarge them for comparison.)

 

There is no perfect replica, only the one you love the most.

Any questions, please contact with us:

Email: [email protected]

whatsapp: +86 17081934955

Telegram Channel: @theonewatches_steve

Website: www.theonewatches.io

Edited by Theonewatches
  • Like 10

Share this post


Link to post
Share on other sites
Corn guy

Great!
Looks like every factory has is weakness. 
But from your experience, who do you think is the best for datejust?

Share this post


Link to post
Share on other sites
Abe Froman

Awesome! Thank you for the hard work doing this comparison.

Share this post


Link to post
Share on other sites
gran

I am so very impressed by your review. I am shocked. It is far and beyond anything I've seen before. I will probably never be able to do such a detailed and metric comparison.

tumblr_mn619jvsCt1rxaho8o1_400.gif?width

Thank you.

 

 

Share this post


Link to post
Share on other sites
Eeewan

Outstanding write up, will definitely help noobs like myself get to grips with all the different facets of reps.

Share this post


Link to post
Share on other sites
Roler

Brilliant post, for someone that has been looking at this watch this help immensely !

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×