bobbyb 0 Posted July 15, 2023 If anyone can provide an amateur the link to a pin which can fit this to repair my sub bracelet (it fell out), would be much appreciated. Tried to take out a link and use the spare pin to put in there to my sheer disappointment that the pin in the link is much bigger than this one so wouldn’t fit Thanks , much appreciated Bobby Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Waspy 306 Posted July 15, 2023 So I have a similar watch, from Noob factory. I measured the pin you are missing: 1.7mm by 13.9mm I measured a bracelet link pin: 1.7mm by 15.45mm I looked on CousinsUk and they don't seem to sell individual pins. A box will cost £18.85 for a box of 60 assorted sizes: https://www.cousinsuk.com/product/watch-bracelet-screws?code=A6638 I think this size will fit (1.7x13.7: 2 Share this post Link to post Share on other sites
bobbyb 0 Posted July 16, 2023 Thanks a lot !!! Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Waspy 306 Posted July 16, 2023 You're welcome, you could always take one pin that you need from the box and then re-sell the box on eBay, just state one pin is missing. There are 5 pins of each size. Could be worth a shot Share this post Link to post Share on other sites
