watchnut 124 Posted October 18, 2012 Hi guys, I have a DSSD that I got from a TD a while back and the crystal isn't set correctly in as much as its about 0.5 mm too high on the 3 o'clock side. The watch is mint apart from this and I know its not a big problem but its there and I know it! Any ideas as to fixing it, I dont have a crystal press but is there anything I can do or do I have to live with it. Cheers in advance. Share this post Link to post Share on other sites
KeNnY 29 Posted October 19, 2012 sometimes can be also the crystal gasket fault needs to be pushed out and pushed in again to check Share this post Link to post Share on other sites
Bobbylah 135 Posted October 19, 2012 Many moons ago, I recall some poster noting that he just stood on it and it popped back in. Not making any recommendations here! Share this post Link to post Share on other sites
10:10 Watch Repair 1 Posted October 19, 2012 careful, I noticed with a couple of the DSSD cases, the rehaut is too deep and / or the crystal is too thin. The reason the crystals may be off is they're not fully pressed, because fully pressing them seats them too low. Share this post Link to post Share on other sites
chrvolt 0 Posted October 22, 2012 My crystal is like yours. My watchsmith couldn't fix it, no matter what he tried. The watch easily passed the waterproof test at 3ATM. Share this post Link to post Share on other sites
KeNnY 29 Posted October 22, 2012 My crystal is like yours. My watchsmith couldn't fix it, no matter what he tried. The watch easily passed the waterproof test at 3ATM. yup that is something I noticed as well Share this post Link to post Share on other sites
watchnut 124 Posted October 24, 2012 OK guys, thanks for the replys. Tony Share this post Link to post Share on other sites
Balad1 0 Posted October 24, 2012 Hi guys, I have a DSSD that I got from a TD a while back and the crystal isn't set correctly in as much as its about 0.5 mm too high on the 3 o'clock side. The watch is mint apart from this and I know its not a big problem but its there and I know it! Any ideas as to fixing it, I dont have a crystal press but is there anything I can do or do I have to live with it. Cheers in advance. If it's worth it, send it to Wiz for repairs considering you're in the UK. Share this post Link to post Share on other sites
