urth4 0 Posted December 31, 2012 Just got the yellow seawolf v2 - bu there is something bugging me. Is the gap between the crown and case supposed to be there? Cant seem to find it on other SW2 posted here... And no, the crown can't be screwed further down Share this post Link to post Share on other sites
Del 4,528 Posted December 31, 2012 Mine has a slight gap and won't screw down flush to the case but it's nothing like as bad as your watch - that's pretty bad. I'd advise you to contact your dealer. Share this post Link to post Share on other sites
Hazz 0 Posted December 31, 2012 could be the stem is not screwed into the crown properly, or the stem is just a bit long. should be an easy fix. Share this post Link to post Share on other sites
hnic 1 Posted December 31, 2012 no this is not how it should be mine screws in till the end have you contacted your dealer yet? Share this post Link to post Share on other sites
mostling 40 Posted December 31, 2012 Yup, it should go all the way in Share this post Link to post Share on other sites
DR3M3L 6 Posted December 31, 2012 Maybe you can try to open it and get the stem + crown out of the movement. Then check if the stem is all the way in the crown. If not the stem is maybe to long, but that would be weird... Share this post Link to post Share on other sites
boneyjr 1 Posted January 2, 2013 other people were having this same problem. Share this post Link to post Share on other sites
Hazz 0 Posted January 2, 2013 had one in today, cut the stem a bit, and now all OK Share this post Link to post Share on other sites
