yawn 122 Posted February 26, 2013 (edited) Hello guys, I recently sent my ploprof for modding and I have been researching the tells on V2 ploprof ever since, here are a few: 1. Wrong hands colour, gen has a gloss steel finish, where rep has a white paint over it, the min hand's orange colour is also a bit off, 2. Date wheel number is a huge tell, gen has a much thicker number, where rep's is very thin, 3. Rep V2 ploprof's logo has happy feet 4. On the side of case, where all slops meet, the joint is not aligned Photos are listed below between rep and gen: Rep ploprof: Gen: In conclusion, V2 ploprof is nowhere near perfection and above-mention tells are quite easy to address, but sadly we have no idea when there will be a V3. Edit: Now include clasp comparison the inside of the clasp is very badly made by rep, and the clicker usually will not close properlly, which caused me some heart attack when my watch almost fall off. once again, the overall quality is kind of poor and the pusher is not that smooth compare to gen. Edit 2: Now the watch is completed by Master Goin and ready to be shipped back, i m very excited now, without further adue, here is the photo: Before: Phase 1 Phase 2: The logo is swapped to a non-happy feet The hand is repainted with sliver colour to look like gen The bezel number now have a sliver undercoat Fully relumed Edlt: more photos: Other thing i have noticed about V2 ploprof is, the size of HE valve, gen has flatter and thinner HE valve compare to the domed and fatter shape of rep v2. So the next project is to get some sand paper to thin off the HE valve on rep and then polish it up. Edited August 16, 2013 by yawn Share this post Link to post Share on other sites
greg_r 81 Posted February 26, 2013 Interesting comparison! Share this post Link to post Share on other sites
KeNnY 29 Posted February 26, 2013 Yes here you can see a small modding I did on White Ploppy http://www.rwg.bz/board/index.php?showtopic=44231 The bezel font also on GEN hag got mirror finish and not black like on rep. The Font I can say is good maybe depends on maker But Logo can be changed, also hands removed white paint and repainted orange for more gen like color as well with White relume. Share this post Link to post Share on other sites
jeffw69 0 Posted February 26, 2013 Are you sure that you have a V2? On my white and black ploppys, date wheel numbers are thick and both don't have happy feet. I do agree on the hands coloring being off. Overall, they are pretty close. IMO. Share this post Link to post Share on other sites
KeNnY 29 Posted February 26, 2013 yes also on my TONY special the font is nice thick as you can see but got happy feet Share this post Link to post Share on other sites
houndoggie 58 Posted February 26, 2013 I thought we had a v3 already. Share this post Link to post Share on other sites
yawn 122 Posted February 26, 2013 (edited) Are you sure that you have a V2? On my white and black ploppys, date wheel numbers are thick and both don't have happy feet. I do agree on the hands coloring being off. Overall, they are pretty close. IMO. My QC shot: Edited February 26, 2013 by yawn Share this post Link to post Share on other sites
jeffw69 0 Posted February 26, 2013 Another shot of my black dial. I really like my ploprofs. I need to take more pics of my white dial ploppy. Share this post Link to post Share on other sites
HeavyKrush 16 Posted February 26, 2013 Ditto, mine does not have happy feet either. Not sure about the font though... Share this post Link to post Share on other sites
KeNnY 29 Posted February 26, 2013 Are you sure that you have a V2? On my white and black ploppys, date wheel numbers are thick and both don't have happy feet. I do agree on the hands coloring being off. Overall, they are pretty close. IMO. My QC shot: I would repaint the black paint in bezel with a glossy color similar to mirror or simply put there reflective disk full relume but with more white daylight lume even if only C1 Aqua , remove of white paint of hands, repaint the orange with more accurate metal orange, the datewheel is good mate Share this post Link to post Share on other sites
yawn 122 Posted February 26, 2013 Are you sure that you have a V2? On my white and black ploppys, date wheel numbers are thick and both don't have happy feet. I do agree on the hands coloring being off. Overall, they are pretty close. IMO. very nice modding, I guess the happy feet is just batch issue, I will see what I can do to get it fixed. the DW might be angle issue, I don't see it was that thin on my QC shot. Share this post Link to post Share on other sites
HeavyKrush 16 Posted February 26, 2013 Straight on shot of mine... Also, not sure I can see the alignment issue... Share this post Link to post Share on other sites
yawn 122 Posted February 26, 2013 Straight on shot of mine... Also, not sure I can see the alignment issue... Nice! no misalignment and happy feet. As I read from RG, the number of bezel for black version should be bright white, if you would consider modding it with hand colour Share this post Link to post Share on other sites
KeNnY 29 Posted February 26, 2013 Are you sure that you have a V2? On my white and black ploppys, date wheel numbers are thick and both don't have happy feet. I do agree on the hands coloring being off. Overall, they are pretty close. IMO. very nice modding, I guess the happy feet is just batch issue, I will see what I can do to get it fixed. the DW might be angle issue, I don't see it was that thin on my QC shot. the DW is good mate, just check these gens Share this post Link to post Share on other sites
yawn 122 Posted February 26, 2013 Are you sure that you have a V2? On my white and black ploppys, date wheel numbers are thick and both don't have happy feet. I do agree on the hands coloring being off. Overall, they are pretty close. IMO. very nice modding, I guess the happy feet is just batch issue, I will see what I can do to get it fixed. the DW might be angle issue, I don't see it was that thin on my QC shot. the DW is good mate, just check these gens thats a relief I guess I'm a pain in the ass for modders. I just want this ploprof to be as close as possible to gen (I got a gen clasp and mesh waiting to be put on this baby Share this post Link to post Share on other sites
KeNnY 29 Posted February 26, 2013 When I look at the bezel insert, it is possible to relume the bezel insert but really hard to make it straight so I would better remove the black paint and put there some glossy finish layer, to mimic the reflective bezel insert text, relume of the hands and dial is mandatory I am going to create this black and white combo on mine As I am waiting V2 case so will do some modding or make V2 white mine Share this post Link to post Share on other sites
allex 0 Posted March 6, 2013 AFAIK the non-white V2 ploprofs are pretty much there - just the whiteness of the bezel markers caused by the paint application to the bezel itself, not the insert and the clasp fix. I've have mine on orange for a couple of years now - amazing watch Share this post Link to post Share on other sites
yawn 122 Posted March 7, 2013 now edit with clasp comparison, enjoy. my v2 is currently under mod and will update pic again for a franken ploprof! Share this post Link to post Share on other sites
replove 0 Posted March 23, 2013 that doesn't look like a v2. maybe bad batch. Share this post Link to post Share on other sites
brOntOk 0 Posted August 18, 2013 i think the main issue for all would be the hand color as they're not white in gen Share this post Link to post Share on other sites
yawn 122 Posted August 31, 2013 i think the main issue for all would be the hand color as they're not white in gen Well, he He valve is another tell. Rep had a domed shape, gen on the other hand is flat, I checked it personally in AD. It's a easy mod, you just need a file and some micro fiber sand paper. Then the result: Share this post Link to post Share on other sites
mtbkr65 0 Posted November 17, 2013 Newbie here, wondering if anyone has one with the black dial they would like to part with? Thanks Share this post Link to post Share on other sites