lildaddym 0 Posted March 28, 2010 I found this after I did some snooping after my hands were off on my rep...same instructions as an ESQ chrono. To synchronize B&R 01-94 Chronograph hands: After a battery change or in the event of an error,you may need to manually adjust the chronograph hands to align them correctly at their zero positions. NOTE: Each press and release of button A will advance the activated hand by one;press and hold button to advance hand rapidly. 1.Pull crown out to position 3. 2.Push and hold buttons A (chrono start/stop) and B (chrono lap time/reset) simultaneously for at least 2 seconds. Chronograph seconds hand C (main) will rotate 360 degrees indicating corrective mode is activated. 3.Use push button A to adjust chronograph seconds hand C. 4.Push button B to switch to hour-counter adjustment. 5.Push button A to adjust hour-counter hand J. 6.Push button B to switch to minute-counter adjustment. 7.Push button A to adjust minute counter hand E. 8.Once hands are properly aligned,push crown back in to position 1. NOTE:Chronograph hand synchronization can be stopped after any step byreturning crown to position 1. Share this post Link to post Share on other sites
watchwing 0 Posted April 15, 2010 Yes,good function instruction. Share this post Link to post Share on other sites
Member X 91 Posted April 15, 2010 Great mini guide, thanks Share this post Link to post Share on other sites