toehh 0 Posted March 1, 2013 Hey everybody, I have a problem with a 2836 movement. I can't get the keyless works right because the clutch return lever won't stay in the groove of the clutch. This makes the clutch move freely every time I get it assembled again. Because of this I can't set time, date and wind the watch. Does anyone know why this is happening or how to solve it? I already tried to assemble and disassemble numerous times. This is what it should look like, my clutch return lever sits higher (not in the groove) I am really clueless here, thanks in advance! Share this post Link to post Share on other sites
Odyseus 1 Posted March 1, 2013 Have you a photo of what you get? It should be noted, that you really need the stem inserted when working on the keyless.. Share this post Link to post Share on other sites
toehh 0 Posted March 1, 2013 The clutch return lever was slightly bent so I bent it back and now it will stay in the clutch groove. But now i reassembled and it will only wind. In wind, date and timesetting position :( Share this post Link to post Share on other sites