edgematic 0 Posted April 25, 2013 Hi guys, Many of you know that I was working on a 1:1 datewheel project. It took a long time because I had some issues with a supplier in Asia. Then I went to a Swiss supplier, it also took a long time but we are finally there! The datewheels are finished. Please see the pics for those that are interested. This datewheel fits a 2824 movement and a 2892 movement, it's made in the 1st place for franken ROO's but it can fit a 15300 as well since that uses a 2824 movement... Price per piece is $51 + shipping (small quantity production, made in Switzerland and import tax & fees make the price quite high for this, I know). But it's a datewheel, not an overlay! Original thread: http://www.rwg.bz/board/index.php?showtopic=38716 Here are the first pics: with a white background to show the offwhite colour: in my scanner: I tried to fit the datewheel to a A2824, afaik the datewheels of an 2892A2 and a 2824 are the same. Since the LWO283 uses a 2892A2 this makes sense as far as the fitment goes. The date window of the LWO has a width of 2,63mm and heigt of 2mm, the numbers need to fit that window. This is positive as well. I used my caliper to show the dimensions of the window. Then I made a window in autocad and printed in 1:1, I cut out the window (although not good) but it shows that it fits in the window as well. Here are the pics: Share this post Link to post Share on other sites