SSTEEL 0 Posted March 5, 2014 Anyone know the part numbers for the crown, and tube of the 45.5mm Planet Ocean? Like a numpty, I ordered the incorrect parts, easily done I guess. Can anyone help? Genuine (right), rep (left (rep), the version I'm after in genuine form).. Share this post Link to post Share on other sites
onzenuub 309 Posted March 5, 2014 ofrei has an Omega parts section with crowns Share this post Link to post Share on other sites
SSTEEL 0 Posted March 5, 2014 Thanks mate, checked, and they don't have this particular crown. Apparently nowhere stocks this type yet, just learned this on RWI :( Share this post Link to post Share on other sites
onzenuub 309 Posted March 5, 2014 Just ask Omega for a replace crown Share this post Link to post Share on other sites
SSTEEL 0 Posted March 5, 2014 I will contact them now, and see what they say Share this post Link to post Share on other sites
Mikey2008 0 Posted March 5, 2014 Crown 069ST42184 (cousinsuk 42184ST) Tube 090ST1232 (cousinsuk X12870) Share this post Link to post Share on other sites
SSTEEL 0 Posted March 5, 2014 Crown 069ST42184 (cousinsuk 42184ST) Tube 090ST1232 (cousinsuk X12870) Thanks Mikey, these are 100% the correct ones? EDIT, nope, those are the ones I already have, and purchased in error Mikey. :( Share this post Link to post Share on other sites
Mikey2008 0 Posted March 5, 2014 Crown 069ST42184 (cousinsuk 42184ST) Tube 090ST1232 (cousinsuk X12870) Thanks Mikey, these are 100% the correct ones? EDIT, nope, those are the ones I already have, and purchased in error Mikey. :( Those are the correct references I ordered for the UPO. You wanted the one on the right with lots of teeth? Either cousinsuk sent you wrong part or you ordered the wrong part. Share this post Link to post Share on other sites
Duzza 182 Posted March 5, 2014 Crown 069ST42184 (cousinsuk 42184ST) Tube 090ST1232 (cousinsuk X12870) Thanks Mikey, these are 100% the correct ones? EDIT, nope, those are the ones I already have, and purchased in error Mikey. :( Those are the correct references I ordered for the UPO. You wanted the one on the right with lots of teeth? Either cousinsuk sent you wrong part or you ordered the wrong part. No, thats the one he ordered incorrectly, he wants the one on the left. Share this post Link to post Share on other sites
SSTEEL 0 Posted March 5, 2014 Genuine is on the right in my photo, the rep is on the left, the one I need a genuine replacement for Correct Duzza mate. Share this post Link to post Share on other sites
Mikey2008 0 Posted March 5, 2014 Ah OK. You meant you want the gen crown for the style on left. Yes ignore my references. Share this post Link to post Share on other sites
SSTEEL 0 Posted March 5, 2014 Correct, sadly this type in genuine form is not available anywhere right now. :( Share this post Link to post Share on other sites
Duzza 182 Posted March 10, 2014 Its the same as I have on my 45.5 titanium PO. Hope mine doesnt break! Share this post Link to post Share on other sites
JSJ 0 Posted April 21, 2014 Correct, sadly this type in genuine form is not available anywhere right now. :( Micky did you find this yet? The nearest I can see on CousinsUK is 42274ST They say Tap 9 (Ø0.90mm) Crown Ø6.60mm Crown Depth 7.60mm Screwdown Stainless Steel Not available till 30June 2014 anyway. Looking at the picture, the depth they quote is quite big compared to the scale but it does look bigger than my rep one so I don't think that is it. If it really is 7.7 mm it would stick out a long way anyway. Diameter of mine is 7.4mm over the flutes and depth of the actual crown without the tube extension I would say is 4.2 mm or a tad less depending on where you measure it. Nothing they list comes even close to this. Surely somebody must have smashed their gen crown by now and needed a replacement. Or dare I say stripped the thread on their gen. This is a mystery to me. I'd like to fix mine before it breaks Share this post Link to post Share on other sites
SSTEEL 0 Posted April 22, 2014 Waiting for stock to become available mate. Share this post Link to post Share on other sites
JSJ 0 Posted April 22, 2014 Stock of which one? You reckon that is the correct one? Share this post Link to post Share on other sites
SSTEEL 0 Posted April 22, 2014 Unsure off the top of my head, but I have the correct part number for the crown I'm looking for. Share this post Link to post Share on other sites
JSJ 0 Posted April 22, 2014 Yeah, me too now. OME-069ST42277 Share this post Link to post Share on other sites
SSTEEL 0 Posted May 22, 2014 I'm now looking for the same crown again, hoping its now stocked with cousins. Anyone know the part number for the crown below? Share this post Link to post Share on other sites
SSTEEL 0 Posted May 22, 2014 Looks like cousins may have stock, found these two which look the same, but need someone to confirm if you can? 9 x Ø6.60mm Screwdown SS (7.60mm) 9 x Ø7.60mm Screwdown SS (7.45mm) Share this post Link to post Share on other sites
SSTEEL 0 Posted May 22, 2014 Ok, Mr Pap over on RWI come to the rescue, its.. 42mm Ceramic PO Crown 9 x Ø6.60mm Screwdown SS (7.60mm) 45.5mm Ceramic Crown 9 x Ø7.60mm Screwdown SS (7.45mm) Share this post Link to post Share on other sites
JSJ 0 Posted May 22, 2014 Yeah, me too now. OME-069ST42277 Yes Cousins just use the last part of the Omega part number for theirs. 42277ST. I put the request through for them to list it when I found it in April. they let me order it even though it wasn't listed. I also asked them for the correct crown tube but I see they still haven't. Do you know which tube it should be? Share this post Link to post Share on other sites
barryb0ng 0 Posted June 10, 2014 Hi, nice to finally see that someone have found what a have been looking for Does anyone know what tube and stem I need to this crown? Share this post Link to post Share on other sites
barryb0ng 0 Posted June 16, 2014 If I look in this document https://www.cousinsuk.com/PDF/categories/6906_Omega%20055CC1681664%20Case.pdf it should be OME-090BC1370. But I can't find it any were Share this post Link to post Share on other sites
kennycoder 97 Posted July 2, 2014 Gah, I'm confused now.. I have CrPO 45.5mm with stripped crown (/tube). So the crown is 9 x Ø7.60mm Screwdown SS (7.45mm) ? And how about the tube? Thanks in advance. Share this post Link to post Share on other sites
