ALE7575 24 Posted December 8, 2014 (edited) KW PAM382 Bronze material – Official Chemical Analysis We all would like to know the chemical composition of PAM 382 reps bronze material. Therefore in order to get the answer I contacted some months ago with KW owner Mehmet and Puretime’s Angus asking them for case samples of KW and ZFac PAM 382 respectively. In parallel I contacted with official Spanish laboratories trying to get a free but reliable chemical analysis of the samples. KW’s Mehmet was immediately willing to send me the sample when the Laboratory was ready. But it was not able to get ZFac sample, because Puretime told me that he had already sent a sample from ZFac to another member (Pete M) in order to make the same official analysis as I wanted. In August 2014 I got, through a friend of mine (an engineer colleague), the possibility of a free chemical analysis from a first class Official Spanish Laboratory. I ask Mehmet for the sample and in some days I received the sample of KW PAM 382 case from Kuvarsit. The sample was an unfinished KW PAM 382 case before machining, taken directly from the current production as I asked to KW. You can see the sample received in below pic. SAMPLE OF KW PAM 382 CASE BEFORE MACHINING At that moment my fried was just starting his summer vacation and I had to wait until the end of September to send him the samples In October my friend got the sample to start the chemical analysis of the bronze. I have the results from about 20 October, but I have not found time to prepare this thread until this moment. TECHNIQUE OF ANALYSIS I wanted to get a chemical analysis by an Atomic Absorption Spectrophotometer, because that was the analysis method I was used to using when I worked in metal alloys. But my friend told me he liked to use a more modern system. It was used one of the most modern, reliable and precise techniques available at this moment: Scanning Electron Microscopy (SEM) See below link for more info: http://serc.carleton...niques/SEM.html http://www.labtestin...g/sem-analysis/ To get an idea about the sophistication of this method, you should know that the cost of the equipment to make this kind of analysis is about 3 million Euros. Of course SEM is a very reliable method of chemical analysis and there is no doubt about the precision of the results. PREPARATION OF THE SAMPLE It was necessary to cut a part of the case to make the analysis. The Laboratory cut a lug of the case to prepare the final sample to be analyzed. This lug was slightly polished to be introduced in the SEM device. You can see in below pics the lug detached and prepared. SAMPLE OF KW PAM 382 CASE WITH THE LUG DETACHED AND PREPARED TO BE INTRODUCED IN THE SEM ELECTRON MICOSCOPE THE RESULTS In the figure below showed you can see the results of the chemical analysis extracted from the SEM Electron Microscope. The square marked in yellow is the chemical composition in Weight%, which is the composition we were looking for. CONCLUSIONS As we can see from above Figure the bronze of the sample KW PAM 382 studied has a chemical composition about as follows: Cu (Copper)- 93% Sn (Tin)- 6% Zn (Zinc)- 1% Therefore, KW bronze is not exactly a CuSn8 like gen, but it is very close to this material. Mainly we can state without doubts that KW bronze is a TRUE BRONZE (it is not at all a Brass, as many people have commented) I have knowledge about this matter because I have worked many years (many time ago) producing Bronzes and Brass and another alloys. KW bronze is actually a CuSn6Zn1 bronze. It is really very similar to CuSn8 and the colour and properties are almost identical to gen bronze. In below Figure you can see the differences between a gen bronze CuSn8 and the CuSn6Zn1 and KW bronze. As you can see differences are a little less content of SN, but a bit more of Zn (less than 1%). Differences between KW bronze and CuSn6Zn1 are almost non existent. Indeed both are the same material. In practice and bearing in mind the application in a watch case, we can say the materials are actually equivalents. In other words: We can expect from KW bronze the same properties and behaviour regarding appearance and patina creation that we will get from Gen bronze PAM 382 Besides, as you can see from the chemical analysis, KW bronze has no impurities. That means that this alloy is made from almost pure metals and using no recycling materials. Therefore KW bronze used in KW PAM 382 is a very good quality alloy. To get a better idea of above statements, you should know that we are using Stainless Steels for super reps much more different from the gen SS than the differences observed between CuSn8 and CuSn6Zn1. To illustrate this matter read my thread about Stainless Steels in watches: SS 316L vs. 316F vs. 904L- The final VERDICT- A technical study http://www.replica-w...ead.php?t=82263 As you can see in above thread the differences between SS 316L and 316F and mainly with SS 904L used by Rolex are way bigger than differences found between CuSn8 and CuSn8Zn1. See below figure where the differences of three SS are showed and compare these differences with the bronzes table differences. Despite above showed differences of composition, we are using SS 316L in some watches made of SS 316F and vice versa. And we are always using either PAM 316L or PAM 316F to make the super reps of Rolex, which the gens are made of a very different SS 904L as you can see in above table. Being the KW sample unfinished and not machined, polished or brushed I was not able to make a reliable comparison between the KW sample and the bronze of my KK PAM 382 V1 from May 2014. But cleaning and brushing a little the surface of the sample, and using my experience in these alloys, I would say that my KW PAM 382 V1 and the sample are made form the same material (it is almost impossible to get a reliable comparison by pics, because some pics seem identical and other different, just a direct visual comparison can show the materials are very close in appearance) Unfortunately we have not the same analysis of ZFac bronze. Some people is saying, and some reviewers and reviews (remember NCcheff reviews http://www.repgeek.com/showthread.php?t=234018 & http://www.replica-watch.info/vb/showthread.php?t=187564 ) that ZFac material is more reddish than KW bronze. From the pics I have seen, I have to agree with these observations. That just means that ZFac material, most likely, has higher content of Copper (Cu) and less Tin (Sn) and other elements, what goes against the quality and properties of the bronze alloy and detaches Zfac bronze from the gen. But that is just a speculation from pics and comments. Anyway, forget the colour on the pics, the false comparisons, the patinas, the speculations… Now we know what we are actually getting when we buy a KW PAM 382: a true bronze CuSn6Zn1 of very high quality, from which we can expect the same colour, properties and behaviour than a gen CuSn8 bronze ************************************************* I would like taking this opportunity to say many thanks to KW’s owner Mehmet for being so kind (and even brave, why not to say it) sending me the sample of the KW case to make the analysis, and congratulations to KW for the good results of this chemical analysis. Thanks for reading ALE Edited December 8, 2014 by ALE7575 Share this post Link to post Share on other sites
RUSH2112 11 Posted December 8, 2014 While I am not a fan of the bronze, I have to give you credit. Your analyses constantly amaze me. Great job. Share this post Link to post Share on other sites
George. 34 Posted December 8, 2014 This is pretty interesting! Thanks for sharing your findings, ALE Share this post Link to post Share on other sites
JMMC 0 Posted December 8, 2014 Great post ! More than happy, now, with my KW bronzo Share this post Link to post Share on other sites
Simms 1 Posted December 8, 2014 I spent half the day yesterday reading your thread over at RWI. You are a machine my friend. Thank you so much for all the information you are constantly providing. Share this post Link to post Share on other sites
machiavegli 6 Posted December 8, 2014 ALE ... I'd buy you a drink if you were in San Diego. This took a lot of hard work -Mach Share this post Link to post Share on other sites
desmomonstro 0 Posted December 8, 2014 Wonderfull ale Share this post Link to post Share on other sites
DeLaForce 2 Posted December 8, 2014 Brilliant Ale ! Share this post Link to post Share on other sites
strozzi 1 Posted December 8, 2014 In other words: they call it Bronzo for a reason! Share this post Link to post Share on other sites
James. 4 Posted December 8, 2014 The conversation at your dinner parties must be amazeballs. Share this post Link to post Share on other sites
MetalMickey 179 Posted December 8, 2014 A well researched and well written piece. Thanks for putting so much time and effort in. I found it fascinating. Share this post Link to post Share on other sites
fatarms 7,777 Posted December 8, 2014 Fantastic I think this is the first chemical analysis thread I've seen for watch casings. Very cool! Share this post Link to post Share on other sites
Not That Rich 21 Posted December 8, 2014 Amazing work Ale Share this post Link to post Share on other sites
Stuvetjee 17 Posted December 8, 2014 A-fucking-mazing work! Share this post Link to post Share on other sites
Gazzla 23 Posted December 8, 2014 Fucking hell, ALE! This is amazeballs!! I never tire of your work. You, Sir, are a legend . . . Share this post Link to post Share on other sites
Poolsfinest 1 Posted December 8, 2014 Nice write up ALE. Do you have a background in Materials Science or is this just a curiosity of yours? Share this post Link to post Share on other sites
trksh-bzr 3 Posted December 8, 2014 Ale you crazy bastard you know that no other watch forum has this kindda fun. Rep foras rock! Share this post Link to post Share on other sites
cuddilyteddy 0 Posted December 8, 2014 The setting up and testing on your part, and his willingness to allow this, are both amazing. Once again thank you! Share this post Link to post Share on other sites
Aks65 0 Posted December 8, 2014 Txs ALE, for enlighten us. All of your reviews are really learning and helpfull. Great job. Share this post Link to post Share on other sites
ALE7575 24 Posted December 8, 2014 Thanks friends I'm really overwhelmed by your comments Glad to be helpful This is just the merit of the SEM Electron microscope ALE Share this post Link to post Share on other sites
mysterio 18 Posted December 8, 2014 Thanks friends I'm really overwhelmed by your comments Glad to be helpful This is just the merit of the SEM Electron microscope ALE Sure ALE, it's just the merit of a multi-million dollar piece of equipment that 99% of the membership has no access to, let alone be able to conduct material analysis with. Don't downplay your part ALE. Even with what you know, sometimes it's who you know (in this case your friend with SEM access). Share this post Link to post Share on other sites
ALE7575 24 Posted December 8, 2014 Mysterio, you always so kind ! Thanks ALE Share this post Link to post Share on other sites
Haltec 0 Posted December 9, 2014 Sem can be purchased for around 15k but not sure about capabilities other than microscoping. http://flickrhivemind.net/User/jeri%20ellsworth/Recent Br Haltec Share this post Link to post Share on other sites
JohnPilot 1 Posted December 9, 2014 Very intersesting work. Thanks for sharing. Will try to get a KW version then. My ZF is not bad but has a "funny" aging behavior. Share this post Link to post Share on other sites