gabmike 0 Posted January 15, 2015 http://www.trusty-watch.com/index.php?main_page=product_info&cPath=1_6&products_id=12618 This is the watch. Does anyone knows iff this ki d of racelets on replicas have screws like modern rolexes or pins? I did search but i did not find anything.. Share this post Link to post Share on other sites
ElvisFreak 73 Posted January 15, 2015 Most of the rep rivet styles have screws where rivets would normally be. The gen bracelet were not meant to have links taken off which is why the clasps had so many adjustment holes (from end to end). Or, on the gens, you could always resort to prying open the mid part of the link which was a piece of folded steel. Share this post Link to post Share on other sites
Harkin Banks 1 Posted January 15, 2015 That watch will have normal pins between the lugs. Lug width is 19mm. You can swap the bracelet easily but finding 19mm replacements are sometimes tricky. 18mm ones will work and 20mm straps can be smushed on. The bracelet will have screw down pins and you will be able to remove and/or add links as you wish. Share this post Link to post Share on other sites
gabmike 0 Posted January 15, 2015 Thnx for your ansers friends.. The watch is on the way Share this post Link to post Share on other sites
