Theonewatches 148 Posted March 6, 2023 (edited) Hello, I'm Steve, I'm back, I've done a lot of GEN and replica Rolex models comparisons, it's time to check Rolex's little brother Tudor, LOL！ ZF recently just released a new Black Bay GMT M79470, so let's take a look and see what ZF has done with this new product, by the way, you can also get a closer look at the authentic Tudor workmanship details, after all, it is Rolex's little brother, I think it should not be bad. Enough crap now, and if I don't start again you'll think I'm an old lady, haha. Front view of the dial In terms of color, there is no second pure black in the world, so there is no need to worry about color difference on the black dial. As we can see, there is a small crack on 6 marker in the gen since it has been scratched when ZF replicas the model for the marker. But this is enough to see that the ZF factory is doing a true 1 to 1 replica, even a small accessory need to be disassembled to replicate, so as to do the closest. Bezel side view Gen bezel is made of frosted steel, the surface frosting treatment of ZF bezel is still very good, very delicate, the edge of the transition to the side of the rounded smooth processing is also very good. Crystal side view The chamfered level of the crystal side and the GEN are also very similar, and the height remains the same. Bezel number view The shape of the ZF inked numerals is well controlled and consistent with the GEN, but the slightest shortcoming is that some of the numerals are a little off the outer edge, but the good thing is that it is hard to notice with the naked eye. In addition, because the GEN is worn and used, the inked numbers on the bezel are stained with oil and dust, so it looks shinier and the surface of the numbers look untidy, while the ZF looks more comfortable. Side view of the markers The ZF maker is made of Super-Luminova luminescent coating to make a whole stick marker, and there is no difference between the shape and size of the GEN scale. In addition, you can see that the triangular scale and the bar scale of GEN have a white edge at the bottom edge, which is not perfectly recovered by ZF factory after using GEN scale. Lume filled view The lume fill of the GEN hands is very granular, while the ZF lume fill is lacking and is slightly raised in places. The GEN markings are where the grain filling on the surface has been scratched out. It is very easy to damage such delicate accessories by using authentic 1 :1 replicas. You can zoom in on the second photo to see that the surface of the ZF circular marker has the same texture as the gen. It is very crystalline and View of the oil-printed font on the dial The font shape of ZF dial is also very good, and the color of the yellow font is almost colorless compared to GEN. Hands Central axle view Due to the different construction of the movement, the center pin of the ZF hand is slightly higher than gen.and the hand stack is incorrect (ICHS) But on the other hand the black sandblasting is very neatly finished. the sandblasted parts of the gen are already leaking fluid. I don't think it was originally intended to be this condition. It should have been damaged in the process of previous replication. After all, it's a $4,500 Swiss watch, so there's no way such poor detailing could have occurred. Date wheel veiw The shape of the date wheel is very well made by ZF, with the same beveled slope as the gen. And the date wheel is also Full-bodied and three-dimensional. However, the seconds marker at 3 o'clock is a little short. In addition, you can obviously see that the ZF calendar digital position is a little down, this is just a little problem in the assembly of this calendar wheel we used for the shooting caused by, I also check our recent QC photos, to confirm that this is just an example, you do not need to care, as long as the QC check clearly on the line. Side view of the crown ZF has done a great job on the edges of the crown teeth, which are as rounded as the gen. And the engraving of classic Tudor plum logo is also stereoscopic clarity. Side view of the case There is nothing wrong with the ZF case shape either. And the curvature of the case and the lugs are also the same as the gen. Back case view The back case teeth are also very well finished by ZF. However, the length of the bevel on the side of the back case is slightly longer compared to the gen. The good thing is that the distance to the naked eye is actually quite noticeable. Engraved view of the case back and lugs The engraving on the case back is very close to the gen in terms of depth and coordination. The numbered engravings on the lugs are particularly good, as they are difficult to distinguish even when magnified to macro. Strap detail view The overall fit of the ZF strap is excellent, with relatively small gaps. The clasp polishing is also very well finished. The adjustment length is up to 8 mm and the feel of the adjustment is smooth, just like the gen quick-adjustment mechanism. Factory engraving on the inside claims to use the same stamping process as the gen. There are differences in the actual carving marks, but in terms of depth and shape, they are very well done. Lume view The lume color of ZF is the same as the gen and there is no difference. Movement view The movement of gen is Tudor's own MT5652, and the ZF applies the Asia 2836 movement. ZF one does not have a brass plate or engraving to imitate a gen movement. The balance wheel is also in the opposite position to that of the gen. But for models with a solid case back, this doesn't matter too much. After all, no one would be bored enough to open the back of your watch. What do you think about it? Comparative view of data Note: All watches are measured in a clamped state, and there may be errors due to the slight deviation of the position of the caliper. In addition, GEN intercepts the strap, and the factory has a steel strap protective film that has not been torn off. The ZF is identical to the gen, except for the weight, which is slightly lighter than gen. Well, that's it for today's post. On the whole, this new Tudor from ZF is a very well made and high quality replica watch. There are still a few things that are not perfect, but we can't ask for too much more than that. After all, this model is only made in the ZF factory at the moment. We don't have to be too hard on ourselves. When there is no choice, it is actually the best choice. On a side note, the market for this non-popular model is relatively small in itself. Regardless of how well it's actually being done, it is already giving us a few more options that a large factory is doing it. At least we won't be confined to a few popular models when it comes to choose replica watches. Finally, thanks to the guys for watching. Please correct me if there are any mistakes. If there is anything else that I have overlooked, please feel free to ask and I will add as much as I can to it. Illustration: Some photos deviate from the real object due to the light source. For details, please refer to the content. The size of the comparison picture is relatively large, you can download it and enlarge it for comparison. There is no perfect replica, only the one you prefer. Thanks. Steve. Website: https://www.theonewatches.ru Telegram: https://t.me/theonewatchesnews WhatsApp: + 86 17081934955 Email: [email protected] Wechat: The5711 Edited May 7 by Theonewatches 8 Share this post Link to post Share on other sites
justasgood 23 Posted March 6, 2023 This is a well executed replica and I would wear it proudly. Share this post Link to post Share on other sites
BadPickle 2,802 Posted March 8, 2023 Great post as usual Share this post Link to post Share on other sites
Redfire1066 11,187 Posted March 8, 2023 Marvelous comparison .... and I appreciated the detailed information .. . Share this post Link to post Share on other sites
urbanfishcake 0 Posted April 26, 2023 Great post. Convinced me to buy one of these. Photos to follow shortly. Share this post Link to post Share on other sites
Michel78 8 Posted April 27, 2023 Great post, i think the gen bezel number ungraving isn't really nice, i find a rep more clean on that point Share this post Link to post Share on other sites
granturismo 2 Posted May 1, 2023 Nice comparison. Waiting for the mine... Share this post Link to post Share on other sites
elconquistador 46 Posted May 2, 2023 It would have been hilarious if ZF copied it exactly except for fixing the only thing wrong with the gen an made it thinner. Sent from my Pixel 7 using Tapatalk 1 Share this post Link to post Share on other sites
Michel78 8 Posted May 7, 2023 On 02/05/2023 at 10:09, elconquistador said: It would have been hilarious if ZF copied it exactly except for fixing the only thing wrong with the gen an made it thinner. Sent from my Pixel 7 using Tapatalk lol agree with you, i don't get it why Tudor doesnt make effort to bring slimmer wacthes, 200m wateproof does not required such big case Share this post Link to post Share on other sites
TA8088 1 Posted November 19, 2023 Digging this model Tudor. Reminds me of a the 1655 which I've always loved. Share this post Link to post Share on other sites
keepittidy 0 Posted December 20, 2023 On 27/04/2023 at 09:57, Michel78 said: Great post, i think the gen bezel number ungraving isn't really nice, i find a rep more clean on that point I agree, as i was scrolling through the images i was convinced they were labelled the wrong way round. :) Share this post Link to post Share on other sites
crashuid 0 Posted January 3 I had one for a couple of weeks. It's crazy quality. I sold it as it was a bit taller for my small wrist. Loved the micro adjustment on the strap. Share this post Link to post Share on other sites
