wildchild696 1 Posted February 6 (edited) Hey there modders After a few months of exceptional timekeeping, +5s per day, my VSF Seamaster 300m V2 has started losing +2/3 minutes per day. https://clickpix.org/image/Picture-2.K30Z5P This may be a simple issue as it has not been serviced since purchase... or perhaps a sign of worse things to come. I was considering swapping out the movement for a high end (Top Grade) eta 2824 e.g below which costs approx. $300 https://clickpix.org/image/2824-2-TOP-GRADE-TE-on-BR-MAIN-REV2.K3SryR Would this work? The case back on the 300m is clear so would like to keep all the extra decorative bits if it were possible to somehow meld the two. https://clickpix.org/image/K3SSK3 If anyone had done this before it would be very helpful to know which model to go for so that all the measurements are correct. There seem to be a variety of options on ebay and Startime etc. Cheers in advance for any thoughts/advice! Edited February 6 by wildchild696 insert images Share this post Link to post Share on other sites
lexidium 94 Posted February 7 (edited) Have you tried de-magnetising it? One of mine did something similar and when I demagnetised it, it went a lot better. Edited February 7 by lexidium Share this post Link to post Share on other sites
wildchild696 1 Posted February 9 Thanks Lexidium, I’ll definitely give that a go! Perhaps I should have bought a Milgauss instead… Share this post Link to post Share on other sites