ReplicaFromDownunder 2 Posted May 31, 2012 Hi all, My sisters tag heuer link with diamond (glass) markers on bezel has had a glass marker fall off. Just want to know what type of glue or substance will re stick to glass marker back on the dial. Does super glue work or need a special glue? Thanks sent via my HTC Desire HD using Tapatalk Share this post Link to post Share on other sites
Amit 72 Posted May 31, 2012 special substance...hmmm Share this post Link to post Share on other sites
WebWind 1 Posted May 31, 2012 GS Hypo Cement should work. Share this post Link to post Share on other sites
ReplicaFromDownunder 2 Posted June 2, 2012 Going to use epoxy glue just a drop on the glass marker sent via my HTC Desire HD using Tapatalk Share this post Link to post Share on other sites
offshore 0 Posted June 2, 2012 Are you talking about the diamond hour markers on the dial? If so you will find that they are attached by a small pin through the dial. the ideal way to reattatch them is to push them back on, and glue from behind the dial. Then you get no glue near the face of the dial or the diamond marker.once you get a glue smear on the diamond part of the marker it will never go away. So look at working from the back. You can use minute amounts of super glue, applied with a pin tip or GS hypo for this job. (or epoxy) not from the front though!! Offshore Share this post Link to post Share on other sites
