Hazz 0 Posted June 26, 2012 Hands on one of my Pams do not sit correct, when on the hour, ie at 3 o'clock the hour hand is not sitting @3, is it just a case of taking out the movement and adjusting them, been like this since day one, but never worn it. Share this post Link to post Share on other sites
greg_r 83 Posted June 26, 2012 Yup - simple matter of removing and refitting the hands. Share this post Link to post Share on other sites
Hazz 0 Posted June 26, 2012 but no tools to remove, presume I can just prevent minute hand from moving and move hour hand a bit. Share this post Link to post Share on other sites
10:10 Watch Repair 1 Posted June 26, 2012 but no tools to remove, presume I can just prevent minute hand from moving and move hour hand a bit. Probably not. You can damage the teeth on the wheels if you do that. It's possible the hand will slip into the correct position though. So if you're feeling lucky... Share this post Link to post Share on other sites
Arism 26 Posted June 26, 2012 My 292k had the same problem, just removed and refitted the hands and problem solved. Any local watchmaker should be able to do the job for you. Share this post Link to post Share on other sites
Hazz 0 Posted June 26, 2012 Just back from watchmaker, forget it 30GBP, for a 10 min job, I will need to get a tool kit, and do those little things myself. Share this post Link to post Share on other sites
Dendo 93 Posted June 26, 2012 Nice job Hazz. Always wondered why chrono hands have such a problem slipping from the correct reset position. I guess it is just a question of removing and refitting them but it happens so often - bad design, or overuse or what? At least with the quartz versions you can move them around but not automatic movements. Share this post Link to post Share on other sites
KeNnY 29 Posted June 26, 2012 30 GBP for setting hands ?!?! unbelievable, not worth more then 1-2 GBP lol. And great job Hazz ! Share this post Link to post Share on other sites
onionbag 1 Posted June 26, 2012 Good job mate, I hope that wisnae my recommendation who tried to charge you that, I've seen her strip down a watch in a couple of minutes. Share this post Link to post Share on other sites
Hazz 0 Posted June 26, 2012 No, it wasn't her, Thanks Guys Share this post Link to post Share on other sites
dingle 57 Posted June 27, 2012 Good work mate. Hopefully they will stay in the correct position. Share this post Link to post Share on other sites
10:10 Watch Repair 1 Posted June 27, 2012 Nice job Hazz. Always wondered why chrono hands have such a problem slipping from the correct reset position. I guess it is just a question of removing and refitting them but it happens so often - bad design, or overuse or what? At least with the quartz versions you can move them around but not automatic movements. because rep hands usually aren't tight enough. in general every part on a rep is not manufactured to the same tolerance as it's Swiss counterpart, but that should be obvious. Share this post Link to post Share on other sites
Dendo 93 Posted June 28, 2012 Nice job Hazz. Always wondered why chrono hands have such a problem slipping from the correct reset position. I guess it is just a question of removing and refitting them but it happens so often - bad design, or overuse or what? At least with the quartz versions you can move them around but not automatic movements. because rep hands usually aren't tight enough. in general every part on a rep is no manufactured to the same tolerance and it's Swiss counterpart, but that should be obvious. Thanks. So it is simply the hand slipping on the pinion - nothing to do with the internal workings of the reset mechanism. I guess the movements are made to one tolerance and the hands are added later based on what the factory is trying to rep - makes sense. Thx. D Share this post Link to post Share on other sites
10:10 Watch Repair 1 Posted June 28, 2012 Thanks. So it is simply the hand slipping on the pinion - nothing to do with the internal workings of the reset mechanism. I guess the movements are made to one tolerance and the hands are added later based on what the factory is trying to rep - makes sense. Thx. D Exactly, different makers / assemblers. It's the hand slipping, the seconds hand especially resets with a lot of speed = force, and it's a long hand meaning a lot of acceleration at the tip Share this post Link to post Share on other sites