okabum 0 Posted January 4, 2010 Hi All of us had a lot of straps, most of them really good, expensive and most important used. I´m doing this for this reason, I had a lot of straps, and don´t wanna buy one more, I prefer use one old. Ingredients - Sewn-In Buckle - mine comes from vikingo99 - cutters - Dealextreme, they are scrap for small uses, but in this case has cut brass very good - dremel - used for sand, drill and polish - springbar - panerai tube - it´s not necesary, but I prefer Checking if springbar is suitable. I used one for 22mm buckle Using cutting pliers, it cuts really good, better than a saw drilling holes - first I use a diamond bit, before drilling adding tube springbar and tube ready to mount, it´s not necesary, but I prefer, in this way springbar has less pressure buckle mounted Share this post Link to post Share on other sites
trailboss99 994 Posted January 5, 2010 Thanks okabum. That's a handy little way to save a few bucks. Nicely done too. Col. Share this post Link to post Share on other sites
greg_r 81 Posted January 5, 2010 Good job, Okabum! Thanks for sharing! B) Share this post Link to post Share on other sites
Crab 0 Posted March 31, 2010 There is so much to learn from your threads Okabum. Kudos. Share this post Link to post Share on other sites