So sad DSSD

[li55ven 0]

hello,

 

I just received my DSSD .

Look at the picture and you will find something on the ring lock.

Can it be removed?

 

thanks

 

Edited November 22, 2012 by li55ven

[Arism 26]

Need a bigger picture mate.

[Cynikal.Mindset 1]

gonna have to pop the crystal out and remove the debris

[PetshaFey 0]

Sucks man, we can not see on the small picture though!

[Hazz 0]

a scratch between the S and Y ?

[li55ven 0]

here is another image.

Anybody have ideas how to remove this debris?

 

[Arism 26]

Remove the movement and use one of these?

Though that might push the debris closer to the bezel.

As said earlier, removing the crystal is another option.

[Cynikal.Mindset 1]

I already told you that you will more than likely have to remove the crystal to remove the debris. Best case scenario is to remove movement and see if you can get the debris out with a piece of paper slid between the crystal and ring lock/rehaut.

[li55ven 0]

The thing that annoys me is that on QC pics there is not this debris.

 

just see..

 

Is there anything i could do? Like returning the watch to mary?

 

thanks!

[Arism 26]

Mary will not accept a return for something so minor.

[Cynikal.Mindset 1]

she will take it back, clean it and send it back...so it will take the better part of 3 months for this that can be fixed in 20min at home

[markeym3 2]

I had this problem before ( not from mary) it is no problem as mentioned before to remove the movement and crystal and clean her up ,, ok a bummer you only just got the watch but better than the slow boat too china ...

cheers

[Dendo 93]

Removing pubic hairs is an easy first mod - just be careful removing the movement the first time you do it - stem release button should be lightly pressed with the largest screwdriver that will do it. Movement screws should not be lost and remember how the go back in and the movement ring's placement. Take a picture as you go. Careful also letting the movement drop gently into your hands.

 

Paper and dust blower should remve the pube for you - Good Luck!

[Dendo 93]

Not crazy about removing the crystal - try to avoid that if you can until you get more practice.

[Bob Reed 0]

You did not see that in the QC pics because it was someplace else in the watch. In shipping that is where it lodged. As has been stated remove the movement and blow it out. If you are not comfortable about doing that find someone who will do it for you.

[li55ven 0]

has anybody a tutorial about how to remove the movement?

i also need the tools needed to do it.

 

when i will be doing it , i will be posting pictures.

 

so you guys think i should not try to contact mary? maybe she will exchange the watch for me?

 

thanks

[Bob Reed 0]

has anybody a tutorial about how to remove the movement?

i also need the tools needed to do it.

 

when i will be doing it , i will be posting pictures.

 

so you guys think i should not try to contact mary? maybe she will exchange the watch for me?

 

thanks

 

Because of a piece of dirt? I doubt it. Besides you want to be without your watch for 2 months or better? Would be faster to send it to one of our Trusted watch smiths.

[goodgood 0]

The date is not centered, a bit low compared to the QC pic?

[PetshaFey 0]

The date is not centered, a bit low compared to the QC pic?

angle of the picture

[Cyril_Clunge 0]

The date is not centered, a bit low compared to the QC pic?

angle of the picture

 

Exactly

[LightGeek 25]

Now is a good time to invest in some basic tools... even if only a sticky ball to open the caseback or if you're so inclined -- a sticky wad of duct tape.

[li55ven 0]

Are you guys sure it will take 2 months?

i don't understand.it took only 6days to come to UK.

if mary exchanges it with a new one,it wont take that long i think

 

do so some genuine rolex get this sort of problem too or is impossible that they get debris?

 

cheers

[Distinct 0]

do so some genuine rolex get this sort of problem too or is impossible that they get debris?

 

cheers

 

In my entire life here at RWG, I tend to stay away from making comments but in this case...

 

What kind of stupid ass fucking question is that? You are either a troll or you are 7 and you should really not be using your Mom's credit card to buy things on the internet.

[Luthier 1]

Go to shopping mall, ask any watchsmith to do it, it will cost you less than shipping fee to China, and will be done in 10-15 minutes.

[Hazz 0]

Are you guys sure it will take 2 months?

i don't understand.it took only 6days to come to UK.

if mary exchanges it with a new one,it wont take that long i think

 

do so some genuine rolex get this sort of problem too or is impossible that they get debris?

 

cheers

I sent you a PM