Wristel 0 Posted January 5, 2013 (edited) Hi!! Total newbee at this(and swedish) so bare with me!! I bought two used PAM reps and they both have 21J Seagull movements... Great looking watches!! now to the not so fun part.. On one of them the stem(i think its called, the pin that goes from the crown in to the watch) unwinds when i tries to set the time.. Turning the crown clockwise (hands backwards) works but it doesent really help because i need to change the date too... Is there any easy fix?.. Edited January 5, 2013 by Wristel Share this post Link to post Share on other sites
tanweekiat 0 Posted January 5, 2013 Easy fix. Loctite will do the trick Buy the appropriate loctite, dip the screw ends and screw it back into the crown. Allow it to dry and you're done. Share this post Link to post Share on other sites
Wristel 0 Posted January 5, 2013 Just to unscrew the crown/stem til it comes out of the watch, dip the tip in Loctite and screw it back in?.. Since i don't know what is going to happend when i unscrew it totally i ask first... So nothing is coming loose or falling apart inside when removing the stem? Share this post Link to post Share on other sites
moredhel 0 Posted January 5, 2013 Hmm... Seems like the keyless works have screwed up or OP pressed too hard on the stem removal button. Any watch wizs? Share this post Link to post Share on other sites
tanweekiat 0 Posted January 5, 2013 Just to unscrew the crown/stem til it comes out of the watch, dip the tip in Loctite and screw it back in?.. Since i don't know what is going to happend when i unscrew it totally i ask first... So nothing is coming loose or falling apart inside when removing the stem? 21j movement are bomb proof! haha! Don't quote me on that. Try to remove the entire stem (with crown) out from the movement. Then unscrew the stem from the crown Dip the end with a tiny loctite screw the stem back into the crown Push the stem back into the movement Job is done. Share this post Link to post Share on other sites
tanweekiat 0 Posted January 5, 2013 Just sold the watch in your avatar! Share this post Link to post Share on other sites
Wristel 0 Posted January 5, 2013 its not the crown/knob thats loose/unwinds.. its the stem(steel-pin) that goes into the watch that unscrews inside the watch then i try to set the time(screws the crown anticlockwise) Share this post Link to post Share on other sites
Wristel 0 Posted January 5, 2013 Just sold the watch in your avatar! saw that one just now but i'mwaiting for a v2 with a modded 7750 inside.. Share this post Link to post Share on other sites
tanweekiat 0 Posted January 5, 2013 Oh! Sorry didn't read properly! It's 4:49am here. Perhaps time to go to the bed after a heavy drink and accidentally sold my watch at drunk prices! Good night! Hope someone can help you! Or you can consider swap with a new movement! its not the crown/knob thats loose/unwinds.. its the stem(steel-pin) that goes into the watch that unscrews inside the watch then i try to set the time(screws the crown anticlockwise) Share this post Link to post Share on other sites
Pihlippe 1,294 Posted January 5, 2013 its not the crown/knob thats loose/unwinds.. its the stem(steel-pin) that goes into the watch that unscrews inside the watch then i try to set the time(screws the crown anticlockwise) Hmm... Seems like the keyless works have screwed up or OP pressed too hard on the stem removal button. Any watch wizs? +1 Seems like a keyless problem..... Share this post Link to post Share on other sites
Wristel 0 Posted January 5, 2013 Anything i can do?.. Share this post Link to post Share on other sites
Pihlippe 1,294 Posted January 5, 2013 Anything i can do?.. Unfortunately, you probably must send it to someone who can fix it for you. Share this post Link to post Share on other sites
Wristel 0 Posted January 5, 2013 And what would that cost me? Any tips on who can do it?.. hopfully in EU, don't want custom to take it! Share this post Link to post Share on other sites