Olly 0 Posted August 11, 2013 Hi fellas, I'm starting to really like the DSSD more and more but when my Dad had the BK DSSD i felt that the quality was not that good. The clasp was poorly made, as was the bracelet and worst of all, the pearl was dreadful. The mods that BK did however where nice. I want to find a DSSD that has great engravings on the insert with a Gen like pearl. I would like a bracelet and clasp that feels very solid and one that doesn't rattle. There are so many versions of the DSSD i really am stuck. I know that the BP version has the Gen construction but the quality is not brilliant. So i'm asking all of the DSSD experts, which DSSD should i get. I've looked at the Vaccum DSSD over on RG but the price is a bit steep. It is what i'm looking for though ! Thanks for you help, Olly Share this post Link to post Share on other sites
SheriffWho 0 Posted August 11, 2013 +1 for BK... No rep is perfect but this is the best out of box dssd you'll find. My bracelet and clasp are perfectly good so not sure about your dads... Once you mod the bezel (pearl/triangle) which is not immediately needed, you have a close to perfect dssd! Best! Share this post Link to post Share on other sites
Rolexwatchman 0 Posted August 11, 2013 http://www.ebay.com/itm/CERAMIC-BEZEL-INSERT-FOR-ROLEX-SEA-DWELLER-DEEP-SEA-/310304839271 you can buy this, not sure if it will fit. Share this post Link to post Share on other sites
Olly 0 Posted August 11, 2013 Also is there a matte dial version ? Share this post Link to post Share on other sites
SheriffWho 0 Posted August 11, 2013 http://www.ebay.com/itm/CERAMIC-BEZEL-INSERT-FOR-ROLEX-SEA-DWELLER-DEEP-SEA-/310304839271 you can buy this, not sure if it will fit. I actually bought this... Haven't attempted install yet. Too busy, but as for bezel... Looks spot on. Once I get this on, my BK will be 95% perfect in looks... The only other mods I may do would be a matte dial mod with a superlume. Maybe even an AR undercoat on crystal. If I get around to those, it'll be 99% in my opinion... Again, as it is out of the box, its pretty damn good! Just for us who want the best possible would be the above mentioned mods... Share this post Link to post Share on other sites
Rolexwatchman 0 Posted August 11, 2013 (edited) without the mods... how many people would actually know if it's real or fake... or should you care to care about that? Also if anyone wearings Rolex or Breitling... they would say fake. Only problem with mine BK is it's not lumed, and triangle isn't perfect. other than that... nothing much. Not noticeable if not looking close. but I guess Olly needs perfect to post on rolex forum and other forum as gen Edited August 11, 2013 by Rolexwatchman Share this post Link to post Share on other sites
Bigcountrykris 0 Posted August 11, 2013 Try reg, his DSSD are very good, they are one of best watches out there once modded, i go diving in mine & its great, as for the clasp & bracelet issue you had, that is strange coz every DSSD i had a look at has a great clasp etc Share this post Link to post Share on other sites
LightGeek 25 Posted August 11, 2013 If you're looking for "to gen" accuracy, don't bother with the DSSD Share this post Link to post Share on other sites
Olly 0 Posted August 11, 2013 Well the issue with the clasp was the following: Engravings looked messy and looked as if they where burned on The pivot point in the middle of the clasp that lifts up for the 2mm micro adjust, the pivot hinge was drilled through the other parts of the clasp The engraving rubbed off very easily Clasp did not close properly micro adjust would slip when you shook your wrist Thats about it. :( Olly Share this post Link to post Share on other sites
Olly 0 Posted August 11, 2013 If you're looking for "to gen" accuracy, don't bother with the DSSD I love the Vaccum DSSD though, it looks fantastic !! Share this post Link to post Share on other sites
Rolexwatchman 0 Posted August 11, 2013 Well the issue with the clasp was the following: Engravings looked messy and looked as if they where burned on The pivot point in the middle of the clasp that lifts up for the 2mm micro adjust, the pivot hinge was drilled through the other parts of the clasp The engraving rubbed off very easily Clasp did not close properly micro adjust would slip when you shook your wrist Thats about it. :( Olly Engravings looked messy and looked as if they where burned on - engraving where? The engraving rubbed off very easily - So far it haven't rubbed off on mine Clasp did not close properly - works fine on mine micro adjust would slip when you shook your wrist - Mine works fine Share this post Link to post Share on other sites
LightGeek 25 Posted August 11, 2013 Well the issue with the clasp was the following: Engravings looked messy and looked as if they where burned on The pivot point in the middle of the clasp that lifts up for the 2mm micro adjust, the pivot hinge was drilled through the other parts of the clasp The engraving rubbed off very easily Clasp did not close properly micro adjust would slip when you shook your wrist Thats about it. :( Olly Engravings looked messy and looked as if they where burned on - engraving where? --- concur, if you mean the clasp. The engraving rubbed off very easily - So far it haven't rubbed off on mine --- was ok on mine. Clasp did not close properly - works fine on mine --- fixable tweak. micro adjust would slip when you shook your wrist - Mine works fine --- fixable tweak Share this post Link to post Share on other sites
diegosaenz 0 Posted August 11, 2013 I got the DSSD from BK. Sadly it seems as if you want accuracy in any Rolex rep then you should buy GEN. If you don't care for small details then go BK, it's the best out of the box. Share this post Link to post Share on other sites
LightGeek 25 Posted August 11, 2013 Jeff has the best DSSD. Share this post Link to post Share on other sites
Olly 0 Posted August 11, 2013 Jeff has the best DSSD. Yes we all know that The engravings I speak of are the ones on the clasp. Share this post Link to post Share on other sites
Olly 0 Posted August 11, 2013 This is the BK DSSD that I mentioned I think I might get a BK and send it to a modder to do the insert, matte dial. Thanks, Olly Share this post Link to post Share on other sites
SheriffWho 0 Posted August 11, 2013 This is the BK DSSD that I mentioned I think I might get a BK and send it to a modder to do the insert, matte dial. Thanks, Olly Yes! That's the way to go for sure! :-) Share this post Link to post Share on other sites
Rolexwatchman 0 Posted August 11, 2013 owh... ok that is one horrible Rolex :S Buy a BK, you might get good samples... Share this post Link to post Share on other sites
Olly 0 Posted August 11, 2013 I'll PM him, see what what Share this post Link to post Share on other sites
Rolexwatchman 0 Posted August 11, 2013 I'll PM him, see what what I didn't get any sample pictures... back then, maybe he offers now? Share this post Link to post Share on other sites
Rolexwatchman 0 Posted August 11, 2013 Here's another solution if you don't want fake looking pearl... http://www.ebay.com/itm/Diamond-Rolex-Sea-Dweller-Deep-sea-Rolex-Sea-Dweller-DEEPSEA-/111139867548?pt=Wristwatches&hash=item19e073cb9c I would hit it... this bad boy is damn nice! Is there fake bezel like this?! Share this post Link to post Share on other sites
SheriffWho 0 Posted August 11, 2013 Here's another solution if you don't want fake looking pearl... http://www.ebay.com/itm/Diamond-Rolex-Sea-Dweller-Deep-sea-Rolex-Sea-Dweller-DEEPSEA-/111139867548?pt=Wristwatches&hash=item19e073cb9c I would hit it... this bad boy is damn nice! Is there fake bezel like this?! It'd look good on you I'm sure. Maybe you should make it a matching set with this: http://s3.amazonaws.com/rapgenius/paulWall_grill.jpg Share this post Link to post Share on other sites
Olly 0 Posted August 11, 2013 Here's another solution if you don't want fake looking pearl... http://www.ebay.com/itm/Diamond-Rolex-Sea-Dweller-Deep-sea-Rolex-Sea-Dweller-DEEPSEA-/111139867548?pt=Wristwatches&hash=item19e073cb9c I would hit it... this bad boy is damn nice! Is there fake bezel like this?! that is awful !! What a waste of a DSSD !! :( Share this post Link to post Share on other sites
Crusader 0 Posted August 11, 2013 Olly, don't you think your sig is a tiny bit too big? It always takes me extra 0.006 second to scroll down the topic because of it Share this post Link to post Share on other sites