boneyjr 1 Posted August 29, 2013 Yesterday I picked up what I am guessing is the newest version of the CrPO (it has the correct AR and correct caseback without the 'liquid metal' insignia). My first impression was a good one. The bracelet is comfortable and the watch has excellent wrist presence. The bezel is tight and everything lines up perfectly, and the lume is bright and crystal is perfect. Also worth mentioning, the 'Omega' engraving on the bracelet clasp is very well done -- crisp and clean. Oh, and the pearl seems (to my naked eye) to be dead center. As we all know, the movement on these is Swiss, and the watch has been keeping perfect time (so far). On to the negatives: I have to be prepared to fix the fading bezel issue because I can see the triangle around the pearl starting to diminish. I am guessing a touch up with spray paint or a paint pen will be in order shortly (I am open to any suggestions). My biggest concern is the crown and stem. While there are currently no problems, the mechanism does not inspire confidence. after unscrewing the crown, the stem clicks out to each position with no problem. However, when pushing it all back in, things get dodgy. It doesn't click back in as you would expect -- ya kinda just need to push and pray. One last thing, this was the dirtiest bracelet I have ever received. I used up 3 cape cod cloths on it and turned them completely black. I could have gone for a 4th but my hands were getting tired. I like the results though -- the bracelet now pops! Well on to pics -- and please let me know any suggestions for the fading bezel fix. Share this post Link to post Share on other sites
simey83 2,073 Posted August 29, 2013 Pity about the bezel problem. Its a beautiful watch. Enjoy it Share this post Link to post Share on other sites
Rolexwatchman 0 Posted August 29, 2013 nice watch!!!! Share this post Link to post Share on other sites
BlackBandit 0 Posted August 29, 2013 Looks stunning, wear it well! Share this post Link to post Share on other sites
diggs 0 Posted August 29, 2013 Looks great! Is the fading bezel issue also common with the orange bezels? Share this post Link to post Share on other sites
boneyjr 1 Posted August 29, 2013 Looks great! Is the fading bezel issue also common with the orange bezels? Thanks. Not sure about the orange bezels. In fact, I am not sure that they make an orange bezel CrPO. Share this post Link to post Share on other sites
Mr. Pap 0 Posted August 29, 2013 Very nice! I had one which i sold mainly cause i could see the bezel totally fading after a couple of months. Otherwise i really liked the watch! Share this post Link to post Share on other sites
alw 0 Posted August 29, 2013 It´s so beautiful. Waiting for my blue TI version to arrive. I believe there is no ceramic orange bezel as the gen doesn´t have it. I wonder: 1. If you can order an updated ceramic replacement bezel for that later on for swapping? 2. The blue ceramic (or is it steel?) will fade too? Share this post Link to post Share on other sites
boneyjr 1 Posted August 29, 2013 It´s so beautiful. Waiting for my blue TI version to arrive. I believe there is no ceramic orange bezel as the gen doesn´t have it. I wonder: 1. If you can order an updated ceramic replacement bezel for that later on for swapping? 2. The blue ceramic (or is it steel?) will fade too? I am hoping you are right about ordering an updated bezel when they are out. That would be the easiest best solution. Share this post Link to post Share on other sites
gecko0 0 Posted September 6, 2013 (edited) While there are currently no problems, the mechanism does not inspire confidence. after unscrewing the crown, the stem clicks out to each position with no problem. However, when pushing it all back in, things get dodgy. It doesn't click back in as you would expect -- ya kinda just need to push and pray. I just received my 42mm of this exact watch and found the same movement concern. I only have a few automatics to compare to (such as a cheap Invicta 9937), but it's pretty rough sounding and feeling in comparison. When I adjust the date, I can't simply push the crown back in and tighten it down...the date moves again. It's not disengaging from the date gear and I have to pull it all the way out, then push all the way in and...as you said, pray. Not confidence inspiring, but otherwise seems to be working fine. I'll have to keep an eye on it and maybe send it off for a good cleaning? Unless this is abnormal and I should talk to my TD, but I'd hate to do that if unnecessary. Edited September 6, 2013 by gecko0 Share this post Link to post Share on other sites
adz25 0 Posted September 6, 2013 Looks great! Enjoy in good health! Share this post Link to post Share on other sites
bruiserreb 0 Posted September 6, 2013 That is a beautiful watch. I just ordered the Titanium Blue version "Liquidmetal" and the bezel pearl was not as spot on as this one (as seen in the QC pics. It may look better in person. Does anyone know of a expert who can mod these with either a genuine or more robust matching bezel? Share this post Link to post Share on other sites
subiim 0 Posted September 6, 2013 I think you're using the cape cod cloths wrong Share this post Link to post Share on other sites
NFleischer 4,355 Posted September 6, 2013 Looks great! Many of these BP Factory Omegas have tube/crown/stem issues. I think maybe the stems are cut too short. The setting bridges do not work well especially when putting them back towards the case. Share this post Link to post Share on other sites
R5tdi 0 Posted September 6, 2013 Hi lovely watch nice to see the fixes on this version I had the very first model wrong AR and fading bezel but I just did a swap to the orange bezel really simple job I ordered the new bezel from Rochest I know it probably needs a coat of Matt spray to make it 100% but tbh I'm hpy with the result Great watch wear it well Share this post Link to post Share on other sites
bruiserreb 0 Posted September 6, 2013 R5, Do you have a link to Rochest? Thanks, Share this post Link to post Share on other sites
R5tdi 0 Posted September 6, 2013 Watchinternational you will find them In the trusted dealer section but currently on probation Share this post Link to post Share on other sites
boneyjr 1 Posted September 10, 2013 I think you're using the cape cod cloths wrong Using them wrong? How do you mean? Share this post Link to post Share on other sites
Dinicol 0 Posted September 14, 2013 -I have exactly the same problem with crown and stem,-pulls out ok but doesn't re engage properly. -would be good to know someone that can fix this issue as one is always concerned that the stem won't go back in at all!!! Share this post Link to post Share on other sites
brownandy1983 0 Posted September 24, 2013 Nice watch where did you get it from Share this post Link to post Share on other sites
ImNotFatImFluffy 0 Posted September 27, 2013 the Orange bezel CrPO, i heard is really steel (supposed to be that way i guess) and comes from rep factories too shiny, to solve that ive heard of spraying the bezel with Krylon Matte paint, i guess the same treatment might help to preserve the Matte Black Bezel Share this post Link to post Share on other sites