borisvos 0 Posted August 30, 2010 Hi lads, I ordered a PAM111 with ReplicaMake. It arrived, but the CG lever is running amok. The axis is loose, so it will not stay in place. Is there any way I can solve this on my own? I am a proper modding novice, so please be gentle with me. Thanks in advance guys! Share this post Link to post Share on other sites
dingle 57 Posted August 30, 2010 Hi lads, I ordered a PAM111 with ReplicaMake. It arrived, but the CG lever is running amok. The axis is loose, so it will not stay in place. Is there any way I can solve this on my own? I am a proper modding novice, so please be gentle with me. Thanks in advance guys! Check with Lay (replicamake) and see if he can send you another CG. should be easy to replace. Share this post Link to post Share on other sites
borisvos 0 Posted August 30, 2010 I might do that. But this is also a good opportunity to do my first carefull babysteps in the wonderful world of modding Share this post Link to post Share on other sites
dingle 57 Posted August 30, 2010 I might do that. But this is also a good opportunity to do my first carefull babysteps in the wonderful world of modding just read this on HD's tutorial. Might be the easiest fix "plumbers epoxy. to tighten the lever around the pin. You can use hot glue (works well) or gorilla glue (messy but works), or whatever else you may think will do." Share this post Link to post Share on other sites
sesshin 0 Posted August 31, 2010 Here is a detailed write-up of the hot glue mod over at RWI http://www.replica-watch.info/vb/showthrea...ght=crown+guard Share this post Link to post Share on other sites
greg_r 83 Posted August 31, 2010 Houndoggie's CG tutorial here (includes tightening the lever as well as sanding the pin to be more gen-like): http://www.replica-watches-guide.com/forum...?showtopic=2026 Share this post Link to post Share on other sites
ReplicaMake 0 Posted September 1, 2010 borisvos, PM sent Share this post Link to post Share on other sites
dingle 57 Posted September 1, 2010 borisvos, PM sent :( Share this post Link to post Share on other sites