greekgod 0 Posted April 1, 2015 HI guys, The cg just fell off today and I have lost one screw. Couldn't find it anywhere. Can anyone help? It's the other screw which is visible. Not the one hiding under the clasp. I am located in Perth, Australia. Very sad. Share this post Link to post Share on other sites
chrish8 0 Posted April 1, 2015 probably one of the more asked/discussed questions on either forum. Use the search function and there are a ton of post for this most say try ebay plenty of them out there Share this post Link to post Share on other sites
greekgod 0 Posted April 1, 2015 Sorry may be I should have phrased it properly. What I meant by asking " can anyone help" and putting "I am located in Perth, Australia" was; that if anyone in Australia has a spare one which they might consider selling/shipping to me ?? Share this post Link to post Share on other sites
missa146 0 Posted April 1, 2015 Hey mate, I'm also based in Perth but unfortunately don't have a spare one. It happened to me 2 years ago and I ordered it from Jackson Tse. Just make sure you get the right size and finish Cheers Share this post Link to post Share on other sites
greekgod 0 Posted April 1, 2015 Thanks missa. Few members here I Perth I see. We should have a gtg! Share this post Link to post Share on other sites
kakashi239 0 Posted April 2, 2015 Replacement screws are pretty easy and cheap to find online Share this post Link to post Share on other sites
greekgod 0 Posted April 2, 2015 Thanks missa. Few members here I Perth I see. We should have a gtg! Will all Pams have the same model of replacement screw for CG?? Thats what I want to know.. exactly what to search for and look for? I have seen the pantime ones and they seem good I reckon Share this post Link to post Share on other sites
mysterio 18 Posted April 2, 2015 Thanks missa. Few members here I Perth I see. We should have a gtg! Will all Pams have the same model of replacement screw for CG?? Thats what I want to know.. exactly what to search for and look for? I have seen the pantime ones and they seem good I reckon Compare the photos of the ones on panatimes website with the remaining screw that you have. I have read that the Luminor Bettarini case takes different screws than the ones for the Luminor 1950s case. Or contact panatime directly. They should be able to answer that question easily as that would be one of the most commonly asked questions of them. Share this post Link to post Share on other sites
greekgod 0 Posted April 2, 2015 Thanks really appreciate your help. So is the rep Pam screws made to the exact specifications to that of gen Share this post Link to post Share on other sites
mysterio 18 Posted April 3, 2015 Thanks really appreciate your help. So is the rep Pam screws made to the exact specifications to that of gen For most of the first class (of which the KW PAM312 is classified) and the super reps, that statement would be true. Share this post Link to post Share on other sites
ALE7575 24 Posted April 3, 2015 (edited) A good idea is assure you don't lose the only screw you have Use this screw to strongly fix the CG in the external part (visible part). Use a bit of Loctite 222 or 243 to assure this screw. Leave free of screw the hole under the lever. Nobody will be able to realize the missing screw under the lever Try to get in its place the CG with only this screw, that will be enough If you want to assure a bit more the fixation, put a bit of the same Loctite in the base of the CG before the assembling That will work ALE Edited April 3, 2015 by ALE7575 Share this post Link to post Share on other sites